![]() |
Welcome to BroadbanterBanter. You are currently viewing as a guest which gives you limited access to view most discussions and other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today. |
|
uk.telecom.broadband (UK broadband) (uk.telecom.broadband) Discussion of broadband services, technology and equipment as provided in the UK. Discussions of specific services based on ADSL, cable modems or other broadband technology are also on-topic. Advertising is not allowed. |
| Thread Tools | Display Modes |
#1
| |||
| |||
![]() hi.. with regard to setting up BT broadband with DSL-300+ and DI-604. Is there anything i should look out for, any quirks. also does transparant bridge work? should the dsl-300 ethernet connection be connected to the wan side of the di-604 or into the switch? regards |
#2
| |||
| |||
![]() See http://www.dlink.co.nz/tech/drivers/...sl300_FAQ2.htm and connect to the WAN side of your router. Hope this helps, John. "rat" wrote in message ... hi.. with regard to setting up BT broadband with DSL-300+ and DI-604. Is there anything i should look out for, any quirks. also does transparant bridge work? should the dsl-300 ethernet connection be connected to the wan side of the di-604 or into the switch? regards |
#3
| |||
| |||
![]() thanks john... i actually found the same on the oz dlink site... the uk one would seem to be ****e "John" wrote in message news:[email protected] See http://www.dlink.co.nz/tech/drivers/...sl300_FAQ2.htm and connect to the WAN side of your router. Hope this helps, John. "rat" wrote in message ... hi.. with regard to setting up BT broadband with DSL-300+ and DI-604. Is there anything i should look out for, any quirks. also does transparant bridge work? should the dsl-300 ethernet connection be connected to the wan side of the di-604 or into the switch? regards |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|