Welcome to BroadbanterBanter. |
You are currently viewing as a guest which gives you limited access to view most discussions and other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today.
|uk.telecom.broadband (UK broadband) (uk.telecom.broadband) Discussion of broadband services, technology and equipment as provided in the UK. Discussions of specific services based on ADSL, cable modems or other broadband technology are also on-topic. Advertising is not allowed.|
| ||Thread Tools||Display Modes|
Linksys wifi router - config for minimum open ports
The Linksys won't have IOS but if you get one of the Wi-fi routers, it will
most likely have some type of firewall software. You should go to the
Linksys site to see if the manual is available for the model you are
"Peter" wrote in message
I am about to get one of these (ethernet - ethernet/wifi product).
While it may seem bizzare to post this question before having it... it
will have to be configured for a fairly strict access list. The
following access list comes from a Cisco 803 router which works fine
in that application (www, email, ftp, sntp ONLY).
Is there an equivalent config for the Linksys?
When I bought the 803, the handbook contained basically a wide-open
ACL and this causes problems with today's constant Blaster etc
attacks. This is for a friend and I can't guarantee that every PC on
the wifi network will have the latest O/S patches...
access-list 100 permit tcp any any eq www
access-list 100 permit udp any any eq domain
access-list 100 permit tcp any any eq domain
access-list 100 permit tcp any any eq nntp
access-list 100 permit tcp any any eq pop3
access-list 100 permit tcp any any eq ftp
access-list 100 permit tcp any any eq ftp-data
access-list 100 permit tcp any eq ftp-data any
access-list 100 permit tcp any any established
access-list 150 permit tcp any any established
access-list 150 permit udp host 18.104.22.168 eq ntp any
access-list 150 deny tcp any any eq ftp-data
access-list 150 permit tcp any eq ftp-data any
access-list 150 deny icmp any any echo
access-list 150 permit icmp any any
access-list 150 permit tcp any any eq ident
access-list 150 permit tcp any any eq smtp
access-list 150 permit udp any eq domain any
access-list 150 deny ip any any
Return address is invalid to help stop junk mail.
E-mail replies to but remove the X and the Y.
Please do NOT copy usenet posts to email - it is NOT necessary.
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Can Linksys broadband/wifi routers run inbound/outbound access lists?||Phillip Remaker||uk.telecom.broadband (UK broadband)||2||December 6th 03 06:11 PM|
|Can Linksys broadband/wifi routers run inbound/outbound access lists?||Walter Roberson||uk.telecom.broadband (UK broadband)||0||December 5th 03 05:13 PM|
|linksys kit wap11 wifi access point and wpc11 pcmcia card||Paul Woolley||uk.telecom.broadband (UK broadband)||0||October 22nd 03 05:28 PM|
|USB router with wifi?||Alan Poulter||uk.telecom.broadband (UK broadband)||0||October 8th 03 06:50 PM|
|ADSL alcatel speedtouch router stealth ports||Mori||uk.telecom.broadband (UK broadband)||1||September 7th 03 05:31 PM|