A Broadband and ADSL forum. BroadbanterBanter

Welcome to BroadbanterBanter.

You are currently viewing as a guest which gives you limited access to view most discussions and other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today.

Go Back   Home » BroadbanterBanter forum » Newsgroup Discussions » uk.telecom.broadband (UK broadband)
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

uk.telecom.broadband (UK broadband) (uk.telecom.broadband) Discussion of broadband services, technology and equipment as provided in the UK. Discussions of specific services based on ADSL, cable modems or other broadband technology are also on-topic. Advertising is not allowed.

Cant access DSL504 ideas?



 
 
Thread Tools Display Modes
  #1  
Old February 4th 04, 01:02 PM posted to uk.telecom.broadband
Chris
external usenet poster
 
Posts: 5
Default Cant access DSL504 ideas?

I can ping the router fine but when i type:

192.168.0.1 into the browser it just times out i dont get the config screen

Any ideas?

Tried unplugging etc still the same


  #2  
Old February 4th 04, 02:08 PM posted to uk.telecom.broadband
Gareth not NLL or anybody else.
external usenet poster
 
Posts: 31
Default Cant access DSL504 ideas?


"Chris" wrote in message
...
I can ping the router fine but when i type:

192.168.0.1 into the browser it just times out i dont get the config

screen

Any ideas?

Tried unplugging etc still the same



open Internet explorer - tools - internet options- connections tab - lan
settings
Are all the ticks removed?? If not, try removing them, alos in the
connections tab, make sure its set to never dial.
Have you set up the gateway bit in lan tcp/ip settings???

Gareth


  #3  
Old February 4th 04, 02:24 PM posted to uk.telecom.broadband
Chris
external usenet poster
 
Posts: 5
Default Cant access DSL504 ideas?


"Gareth not NLL or anybody else." wrote in
message ...

"Chris" wrote in message
...
I can ping the router fine but when i type:

192.168.0.1 into the browser it just times out i dont get the config

screen

Any ideas?

Tried unplugging etc still the same



open Internet explorer - tools - internet options- connections tab - lan
settings
Are all the ticks removed?? If not, try removing them, alos in the
connections tab, make sure its set to never dial.
Have you set up the gateway bit in lan tcp/ip settings???

Gareth



sry maybe my post wasnt clear.
Its been fine but suddenly stopped letting me access. I can still access
the internet etc, i just cant get the config screen up anymore (from any of
the pc's).

i believe you can access it via the r232 port which i am am trying to figure
out how to do.



  #4  
Old February 4th 04, 06:24 PM posted to uk.telecom.broadband
Grant Crozier
external usenet poster
 
Posts: 59
Default Cant access DSL504 ideas?

On Wed, 4 Feb 2004 13:02:55 -0000, "Chris" wrote:

I can ping the router fine but when i type:

192.168.0.1 into the browser it just times out i dont get the config screen

Any ideas?

Tried unplugging etc still the same

If it is the D-Link 504 you are on about here Chris get rid of it they
are crap just had one which was re setting to factory default ever
24hrs or so bloody rubbish they are.
Grant .
  #5  
Old February 4th 04, 07:16 PM posted to uk.telecom.broadband
Chris
external usenet poster
 
Posts: 5
Default Cant access DSL504 ideas?


"fred bloggs" wrote in message
...
Chris,

power down all pcs and then switch the 504 off for a couple of minutes.

When
it comes back up, power up your pcs and you should be able to get to it.
You original post said you were just typing in the ip address. Bit dumb,

but
you are putting in the "http://" before it aren't you?

Let us know if this fixes it

Cheers,Mike


yep, had the http.
had to telnet in and reset it back to factory condition in the end.
powering down both the pcs and router might have been a good idea though.


  #6  
Old February 4th 04, 09:32 PM posted to uk.telecom.broadband
Chris
external usenet poster
 
Posts: 5
Default Cant access DSL504 ideas?


"Chris" wrote in message
...

"fred bloggs" wrote in message
...
Chris,

power down all pcs and then switch the 504 off for a couple of minutes.

When
it comes back up, power up your pcs and you should be able to get to it.
You original post said you were just typing in the ip address. Bit dumb,

but
you are putting in the "http://" before it aren't you?

Let us know if this fixes it

Cheers,Mike


yep, had the http.
had to telnet in and reset it back to factory condition in the end.
powering down both the pcs and router might have been a good idea though.



grrr, its done it again. seems to be everytime i go in and change some
config.
I disabled port redirection this time, saved and restarted then after that
couldnt access it via the browser again.
tried powering - down didnt work, had to return it to the default config
again via telnet


 




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Any ideas why I have to wait for data? David Brear uk.telecom.broadband (UK broadband) 3 January 26th 04 01:37 AM
Any ideas - SAR 715 Sean Nugent uk.telecom.broadband (UK broadband) 2 August 16th 03 12:24 PM
Any ideas? Goofball uk.telecom.broadband (UK broadband) 3 August 14th 03 09:42 PM
How long? Any ideas Paul Roberts uk.telecom.broadband (UK broadband) 0 August 6th 03 01:30 PM


All times are GMT +1. The time now is 08:06 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.Content Relevant URLs by vBSEO 2.4.0
Copyright 2004-2019 BroadbanterBanter.
The comments are property of their posters.