A Broadband and ADSL forum. BroadbanterBanter

Welcome to BroadbanterBanter.

You are currently viewing as a guest which gives you limited access to view most discussions and other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today.

Go Back   Home » BroadbanterBanter forum » Newsgroup Discussions » uk.telecom.broadband (UK broadband)
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

uk.telecom.broadband (UK broadband) (uk.telecom.broadband) Discussion of broadband services, technology and equipment as provided in the UK. Discussions of specific services based on ADSL, cable modems or other broadband technology are also on-topic. Advertising is not allowed.

Speedtouch 530 issue



 
 
Thread Tools Display Modes
  #1  
Old September 11th 04, 09:12 AM posted to uk.telecom.broadband
Beck
external usenet poster
 
Posts: 180
Default Speedtouch 530 issue

Not sure if this is a problem, or if I have done something wrong setting it up
or if its normal.

Received this router from BTY yesterday so duly set it up. The usb lights up
fine. The power on the router light is fine. But the lan light (@ sign which
shows when connected to phoneline) is supposed to be flashing green/yellow when
the line is not activated. But there is no light on at all.
I have put the filter into the wall socket with the adsl in the adsl slot and
the phones in a triple socket on the phone slot. I was told this setup with the
filter would be fine.
The installation was flawless and no errors, usb installed fine and it was a
doddle.
So I am not sure what is up.
Unless the manual is wrong and when the exchange is not ready you really do get
no light at all.
So if anyone has any experience with this router, can you tell me if you had the
same thing with the light not coming on please?

thanks.


  #2  
Old September 11th 04, 10:13 AM posted to uk.telecom.broadband
Stephen Stewart
external usenet poster
 
Posts: 84
Default Speedtouch 530 issue


"Beck" wrote in message
...
Not sure if this is a problem, or if I have done something wrong setting
it up
or if its normal.

Received this router from BTY yesterday so duly set it up. The usb lights
up
fine. The power on the router light is fine. But the lan light (@ sign
which
shows when connected to phoneline) is supposed to be flashing green/yellow
when
the line is not activated. But there is no light on at all.
I have put the filter into the wall socket with the adsl in the adsl slot
and
the phones in a triple socket on the phone slot. I was told this setup
with the
filter would be fine.
The installation was flawless and no errors, usb installed fine and it was
a
doddle.
So I am not sure what is up.
Unless the manual is wrong and when the exchange is not ready you really
do get
no light at all.
So if anyone has any experience with this router, can you tell me if you
had the
same thing with the light not coming on please?

thanks.



The @ light is off when there's no DSL line present so if your line hasn't
been activated yet then this should be what you get.

Flashing amber indicates that DSL line is present and synchronisation is
pending.

This is followed by solid amber which indicates DSL synch is achieved but it
only flashes between green and amber when the connection is pending.

This is the last combination in the sequence prior to solid green when end
to end connection is achieved.

Hope this helps.


Stephen


  #3  
Old September 11th 04, 10:25 AM posted to uk.telecom.broadband
Beck
external usenet poster
 
Posts: 180
Default Speedtouch 530 issue


"Stephen Stewart" wrote in message
...
The @ light is off when there's no DSL line present so if your line hasn't
been activated yet then this should be what you get.

Flashing amber indicates that DSL line is present and synchronisation is
pending.

This is followed by solid amber which indicates DSL synch is achieved but it
only flashes between green and amber when the connection is pending.

This is the last combination in the sequence prior to solid green when end
to end connection is achieved.


Thanks Stephen, the manual seemed to say to the contrary, I probably misread it.
At least I know what to expect now, ta.


 




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Plus net Adobe download issue? Jann uk.telecom.broadband (UK broadband) 9 July 21st 04 11:34 AM
BT cock-up? ... Plusnet BB issue TX2 uk.telecom.broadband (UK broadband) 37 June 30th 04 06:15 PM
Vigor 2600 Printing Issue David Bradley uk.telecom.broadband (UK broadband) 5 December 29th 03 11:54 AM
Caller ID issue with Philips Onis 200 Jonathan George uk.telecom.broadband (UK broadband) 17 November 11th 03 05:44 PM
USB modem no dial tone issue Richard Clarke uk.telecom.broadband (UK broadband) 1 October 7th 03 09:09 PM


All times are GMT +1. The time now is 09:54 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.Content Relevant URLs by vBSEO 2.4.0
Copyright 2004-2019 BroadbanterBanter.
The comments are property of their posters.