A Broadband and ADSL forum. BroadbanterBanter

Welcome to BroadbanterBanter.

You are currently viewing as a guest which gives you limited access to view most discussions and other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today.

Go Back   Home » BroadbanterBanter forum » Newsgroup Discussions » uk.telecom.voip (UK VOIP)
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

uk.telecom.voip (UK VOIP) (uk.telecom.voip) Discussion of topics relevant to packet based voice technologies including Voice over IP (VoIP), Fax over IP (FoIP), Voice over Frame Relay (VoFR), Voice over Broadband (VoB) and Voice on the Net (VoN) as well as service providers, hardware and software for use with these technologies. Advertising is not allowed.

ATAs and REN



 
 
Thread Tools Display Modes
  #1  
Old July 21st 05, 03:01 AM posted to uk.telecom.voip
Ivor Jones
external usenet poster
 
Posts: 3,969
Default ATAs and REN


"Mark" wrote in message
...
Pardon my ignorance....

What is the REN of a typical FXS port on an ATA? Are multiple FXS
ports (where provided) to allow support for multiple service providers
(one per port) or to support multiple phones on one service?


The Sipura range (SPA-2000 etc. are typically REN 3 per port, as opposed
to 4 on a BT line.

Re. multiple ports, each is configurable separately in most cases.

Or perhaps both depending on config??


Not usually, although the Fritz!Box Fon from AVM can be configured to
allow phones connected to both ports to ring simultaneously if a call
comes in on any or all lines connected, including a fixed (analogue or
ISDN) line.

Ivor


  #2  
Old July 22nd 05, 11:23 AM posted to uk.telecom.voip
Andrew Gabriel
external usenet poster
 
Posts: 15
Default ATAs and REN

In article ,
"Ivor Jones" writes:

The Sipura range (SPA-2000 etc. are typically REN 3 per port, as opposed
to 4 on a BT line.


A BT line is a minimum of 4. Most BT lines will actually be
quite a bit higher, unless you are on a maximum length line
from the exchange.

(Fond memories of taking prototype telephone apparatus up
to Baynard House to get BT to tell us what REN number we
could stick on it... ;-)

--
Andrew Gabriel
 




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ATAs and REN Andrew Gabriel uk.telecom.voip (UK VOIP) 1 July 21st 05 06:28 PM
ATAs and REN Phil Thompson uk.telecom.voip (UK VOIP) 0 July 20th 05 10:49 PM


All times are GMT +1. The time now is 03:41 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.Content Relevant URLs by vBSEO 2.4.0
Copyright 2004-2020 BroadbanterBanter.
The comments are property of their posters.