A Broadband and ADSL forum. BroadbanterBanter

Welcome to BroadbanterBanter.

You are currently viewing as a guest which gives you limited access to view most discussions and other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today.

Go Back   Home » BroadbanterBanter forum » Newsgroup Discussions » uk.telecom.voip (UK VOIP)
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

uk.telecom.voip (UK VOIP) (uk.telecom.voip) Discussion of topics relevant to packet based voice technologies including Voice over IP (VoIP), Fax over IP (FoIP), Voice over Frame Relay (VoFR), Voice over Broadband (VoB) and Voice on the Net (VoN) as well as service providers, hardware and software for use with these technologies. Advertising is not allowed.

Outgoing calls with voip.co.uk



 
 
Thread Tools Display Modes
  #1  
Old January 21st 06, 03:49 PM posted to uk.telecom.voip
Matt
external usenet poster
 
Posts: 141
Default Outgoing calls with voip.co.uk

Hi,

Having trouble making outgoing calls over voip.co.uk on my asterisk
setup.

The cli gives...

asterisk1*CLI
-- Executing Macro("SIP/206-c9aa", "dialout-trunk|12|01213332xxx|")
in new stack
-- Executing GotoIf("SIP/206-c9aa", "1?3:2)") in new stack
-- Goto (macro-dialout-trunk,s,3)
-- Executing Macro("SIP/206-c9aa", "record-enable|206|OUT") in new
stack
-- Executing GotoIf("SIP/206-c9aa", "0 0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing GotoIf("SIP/206-c9aa", "1?5:8") in new stack
-- Goto (macro-record-enable,s,5)
-- Executing DBget("SIP/206-c9aa", "RecEnable=RECORD-OUT/206") in
new stack
-- DBget: varname=RecEnable, family=RECORD-OUT, key=206
-- DBget: set variable RecEnable to DISABLED
-- Executing SetVar("SIP/206-c9aa",
"CALLFILENAME=OUT206-20060121-154747-1137858467.462") in new stack
-- Executing Goto("SIP/206-c9aa", "s|14") in new stack
-- Goto (macro-record-enable,s,14)
-- Executing GotoIf("SIP/206-c9aa", "0?15:99") in new stack
-- Goto (macro-record-enable,s,99)
-- Executing NoOp("SIP/206-c9aa", "NO RECORDING NEEDED") in new
stack
-- Executing GotoIf("SIP/206-c9aa", "1?7") in new stack
-- Goto (macro-dialout-trunk,s,7)
-- Executing GotoIf("SIP/206-c9aa", "0?9") in new stack
-- Executing SetCallerID("SIP/206-c9aa", "01827218xxx") in new
stack
-- Executing SetGroup("SIP/206-c9aa", "OUT_12") in new stack
-- Executing CheckGroup("SIP/206-c9aa", "1") in new stack
-- Executing SetVar("SIP/206-c9aa", "DIAL_NUMBER=01213332xxx") in
new stack
-- Executing SetVar("SIP/206-c9aa", "DIAL_TRUNK=12") in new stack
-- Executing AGI("SIP/206-c9aa", "fixlocalprefix") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
-- AGI Script fixlocalprefix completed, returning 0
-- Executing SetVar("SIP/206-c9aa", "OUTNUM=01213332xxx") in new
stack
-- Executing Cut("SIP/206-c9aa", "custom=OUT_12|:|1") in new stack
-- Executing GotoIf("SIP/206-c9aa", "0?19") in new stack
-- Executing Dial("SIP/206-c9aa", "SIP/ems_voip/01213332xx") in new
stack
-- Called ems_voip/01213332xxx


and then sits there until I hangup.

Can anyone spot anything odd?

Many thanks


Matthew

  #2  
Old January 21st 06, 04:02 PM posted to uk.telecom.voip
Jono
external usenet poster
 
Posts: 73
Default Outgoing calls with voip.co.uk


"Matt" wrote in message
oups.com...
Hi,

Having trouble making outgoing calls over voip.co.uk on my asterisk
setup.

The cli gives...

asterisk1*CLI
-- Executing Macro("SIP/206-c9aa", "dialout-trunk|12|01213332xxx|")
in new stack
-- Executing GotoIf("SIP/206-c9aa", "1?3:2)") in new stack
-- Goto (macro-dialout-trunk,s,3)
-- Executing Macro("SIP/206-c9aa", "record-enable|206|OUT") in new
stack
-- Executing GotoIf("SIP/206-c9aa", "0 0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing GotoIf("SIP/206-c9aa", "1?5:8") in new stack
-- Goto (macro-record-enable,s,5)
-- Executing DBget("SIP/206-c9aa", "RecEnable=RECORD-OUT/206") in
new stack
-- DBget: varname=RecEnable, family=RECORD-OUT, key=206
-- DBget: set variable RecEnable to DISABLED
-- Executing SetVar("SIP/206-c9aa",
"CALLFILENAME=OUT206-20060121-154747-1137858467.462") in new stack
-- Executing Goto("SIP/206-c9aa", "s|14") in new stack
-- Goto (macro-record-enable,s,14)
-- Executing GotoIf("SIP/206-c9aa", "0?15:99") in new stack
-- Goto (macro-record-enable,s,99)
-- Executing NoOp("SIP/206-c9aa", "NO RECORDING NEEDED") in new
stack
-- Executing GotoIf("SIP/206-c9aa", "1?7") in new stack
-- Goto (macro-dialout-trunk,s,7)
-- Executing GotoIf("SIP/206-c9aa", "0?9") in new stack
-- Executing SetCallerID("SIP/206-c9aa", "01827218xxx") in new
stack
-- Executing SetGroup("SIP/206-c9aa", "OUT_12") in new stack
-- Executing CheckGroup("SIP/206-c9aa", "1") in new stack
-- Executing SetVar("SIP/206-c9aa", "DIAL_NUMBER=01213332xxx") in
new stack
-- Executing SetVar("SIP/206-c9aa", "DIAL_TRUNK=12") in new stack
-- Executing AGI("SIP/206-c9aa", "fixlocalprefix") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
-- AGI Script fixlocalprefix completed, returning 0
-- Executing SetVar("SIP/206-c9aa", "OUTNUM=01213332xxx") in new
stack
-- Executing Cut("SIP/206-c9aa", "custom=OUT_12|:|1") in new stack
-- Executing GotoIf("SIP/206-c9aa", "0?19") in new stack
-- Executing Dial("SIP/206-c9aa", "SIP/ems_voip/01213332xx") in new
stack
-- Called ems_voip/01213332xxx


and then sits there until I hangup.

Can anyone spot anything odd?

Many thanks


Matthew


Working fine here.

Below's the output from my CLI for you to compare.....

-- Executing Macro("SIP/204-4e99", "dialout-trunk|12|0800800150|") in
new stack
-- Executing GotoIf("SIP/204-4e99", "1?3:2)") in new stack
-- Goto (macro-dialout-trunk,s,3)
-- Executing Macro("SIP/204-4e99", "record-enable|204|OUT") in new stack
-- Executing GotoIf("SIP/204-4e99", "0 0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing GotoIf("SIP/204-4e99", "1?5:8") in new stack
-- Goto (macro-record-enable,s,5)
-- Executing DBget("SIP/204-4e99", "RecEnable=RECORD-OUT/204") in new
stack
-- DBget: varname=RecEnable, family=RECORD-OUT, key=204
-- DBget: set variable RecEnable to ENABLED
-- Executing SetVar("SIP/204-4e99",
"CALLFILENAME=OUT204-20060121-155624-1137858984.243") in new stack
-- Executing Goto("SIP/204-4e99", "s|14") in new stack
-- Goto (macro-record-enable,s,14)
-- Executing GotoIf("SIP/204-4e99", "1?15:99") in new stack
-- Goto (macro-record-enable,s,15)
-- Executing Monitor("SIP/204-4e99",
"wav49|OUT204-20060121-155624-1137858984.243| mb") in new stack
-- Executing GotoIf("SIP/204-4e99", "1?7") in new stack
-- Goto (macro-dialout-trunk,s,7)
-- Executing GotoIf("SIP/204-4e99", "0?9") in new stack
-- Executing SetCallerID("SIP/204-4e99", "0xxxxxxxxxx") in new stack
-- Executing SetGroup("SIP/204-4e99", "OUT_12") in new stack
-- Executing CheckGroup("SIP/204-4e99", "") in new stack
-- Executing SetVar("SIP/204-4e99", "DIAL_NUMBER=0800800150") in new
stack
-- Executing SetVar("SIP/204-4e99", "DIAL_TRUNK=12") in new stack
-- Executing AGI("SIP/204-4e99", "fixlocalprefix") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
-- AGI Script fixlocalprefix completed, returning 0
-- Executing SetVar("SIP/204-4e99", "OUTNUM=0800800150") in new stack
-- Executing Cut("SIP/204-4e99", "custom=OUT_12|:|1") in new stack
-- Executing GotoIf("SIP/204-4e99", "0?19") in new stack
-- Executing Dial("SIP/204-4e99", "SIP/voip.co.uk/0800800150") in new
stack
-- Called voip.co.uk/0800800150
-- SIP/voip.co.uk-bb4d is ringing
-- SIP/voip.co.uk-bb4d answered SIP/204-4e99


  #3  
Old January 21st 06, 06:45 PM posted to uk.telecom.voip
Matt
external usenet poster
 
Posts: 141
Default Outgoing calls with voip.co.uk

Looks like I'm not getting the response from their server to tell
asterisk the line is ringing..

-- SIP/voip.co.uk-bb4d is ringing
-- SIP/voip.co.uk-bb4d answered SIP/204-4e99


Still waiting for a reply from Theo @ voip.co.uk

  #4  
Old January 22nd 06, 09:39 AM posted to uk.telecom.voip
NutCracker
external usenet poster
 
Posts: 31
Default Outgoing calls with voip.co.uk

On 21 Jan 2006 10:45:19 -0800, "Matt" wrote:

Looks like I'm not getting the response from their server to tell
asterisk the line is ringing..

-- SIP/voip.co.uk-bb4d is ringing
-- SIP/voip.co.uk-bb4d answered SIP/204-4e99


Still waiting for a reply from Theo @ voip.co.uk



This may not be related, but voip.co.uk are working on a fix to a problem with
call terminations - and there meant to be updating the software this weekend.


"Our technical team have discovered a potential problem with certain SIP
devices, which is causing spurious call termination issue for users of these
devices. We are implementing a software update, which will contend with this
issue and resolve these call terminations problems.

We appreciate your continued patience with this problem and expect that your
issue will be resolved by Monday."


  #5  
Old January 24th 06, 09:42 PM posted to uk.telecom.voip
NutCracker
external usenet poster
 
Posts: 31
Default Outgoing calls with voip.co.uk

On Sun, 22 Jan 2006 09:39:58 +0000, NutCracker wrote:

On 21 Jan 2006 10:45:19 -0800, "Matt" wrote:

Looks like I'm not getting the response from their server to tell
asterisk the line is ringing..

-- SIP/voip.co.uk-bb4d is ringing
-- SIP/voip.co.uk-bb4d answered SIP/204-4e99


Still waiting for a reply from Theo @ voip.co.uk



This may not be related, but voip.co.uk are working on a fix to a problem with
call terminations - and there meant to be updating the software this weekend.


"Our technical team have discovered a potential problem with certain SIP
devices, which is causing spurious call termination issue for users of these
devices. We are implementing a software update, which will contend with this
issue and resolve these call terminations problems.

We appreciate your continued patience with this problem and expect that your
issue will be resolved by Monday."


*UPDATE*

Voip.co.uk have identified the problem that is causing calls to be disconnected
with certain devices under certain circumstances. This fix will be applied to
the voip.co.uk platform tonight @ 23:30.

The issue with dialling 121 (vociemail) has also been identified and is related
to the above problem (related to NAT conditions). A fix has been made although
further testing is required.



  #6  
Old January 25th 06, 08:16 AM posted to uk.telecom.voip
David Floyd
external usenet poster
 
Posts: 460
Default Outgoing calls with voip.co.uk

In message of Tue, 24 Jan 2006, NutCracker writes

The issue with dialling 121 (vociemail) has also been identified and is related
to the above problem (related to NAT conditions). A fix has been made although
further testing is required.


I wish that they would provide access to voicemail from other phones -
as promised!

That is wheat I really need so that I can pick my voicemail up when I'm
away or travelling.

DF
 




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Short calls with voip.co.uk Tony Arnold uk.telecom.voip (UK VOIP) 3 January 20th 06 08:52 AM
Constant engaged tone - still make outgoing & incoming calls G uk.telecom.broadband (UK broadband) 4 October 16th 05 02:15 PM
New Zealand to UK voip calls... Doz uk.telecom.voip (UK VOIP) 12 September 13th 05 09:37 PM
Using a different number ID for outgoing calls on 18866 voip? James Fisher uk.telecom.voip (UK VOIP) 14 July 8th 05 08:04 PM
Video calls with VoIP? Paul D.Smith uk.telecom.broadband (UK broadband) 0 April 7th 05 08:36 AM


All times are GMT +1. The time now is 03:51 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.Content Relevant URLs by vBSEO 2.4.0
Copyright 2004-2019 BroadbanterBanter.
The comments are property of their posters.