A Broadband and ADSL forum. BroadbanterBanter

Welcome to BroadbanterBanter.

You are currently viewing as a guest which gives you limited access to view most discussions and other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today.

Go Back   Home » BroadbanterBanter forum » Newsgroup Discussions » uk.telecom.voip (UK VOIP)
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

uk.telecom.voip (UK VOIP) (uk.telecom.voip) Discussion of topics relevant to packet based voice technologies including Voice over IP (VoIP), Fax over IP (FoIP), Voice over Frame Relay (VoFR), Voice over Broadband (VoB) and Voice on the Net (VoN) as well as service providers, hardware and software for use with these technologies. Advertising is not allowed.

Cisco Dial Plan!



 
 
Thread Tools Display Modes
  #1  
Old May 29th 06, 02:47 AM posted to uk.telecom.voip
sean
external usenet poster
 
Posts: 415
Default Cisco Dial Plan!

I need help with a Cisco dial plan please, i need to be able to dial *8,
which i dont think i currently can.

*St4-|#St4-|911|1#t8.r9t2-|0#t811.rat4-|^1t4#.- is current dial plan,
and makes little sense to me
  #2  
Old May 29th 06, 10:30 AM posted to uk.telecom.voip
Jono
external usenet poster
 
Posts: 4
Default Cisco Dial Plan!


"Sean" wrote in message
...
I need help with a Cisco dial plan please, i need to be able to dial *8,
which i dont think i currently can.

*St4-|#St4-|911|1#t8.r9t2-|0#t811.rat4-|^1t4#.- is current dial plan,
and makes little sense to me


What have you bought now? grin

Have you looked at the "Cisco Config" link within AMP on the Maintenance
page?



  #3  
Old May 29th 06, 01:00 PM posted to uk.telecom.voip
sean
external usenet poster
 
Posts: 415
Default Cisco Dial Plan!

Jono wrote:
"Sean" wrote in message
...
I need help with a Cisco dial plan please, i need to be able to dial *8,
which i dont think i currently can.

*St4-|#St4-|911|1#t8.r9t2-|0#t811.rat4-|^1t4#.- is current dial plan,
and makes little sense to me


What have you bought now? grin

Have you looked at the "Cisco Config" link within AMP on the Maintenance
page?




I just dug out a Cisco ATA 186...... Don't think i need the config
things in asterisk?
  #4  
Old May 29th 06, 02:53 PM posted to uk.telecom.voip
Jono
external usenet poster
 
Posts: 4
Default Cisco Dial Plan!


"Sean" wrote in message news:e5eno7



I just dug out a Cisco ATA 186...... Don't think i need the config things
in asterisk?


I have no idea how the dial plan is constructed in a Cisco.........I just
happened to notice that there is a wizard for creating dial plans for Cisco
phones within the maintenance pages of AMP.


  #5  
Old May 29th 06, 05:07 PM posted to uk.telecom.voip
sean
external usenet poster
 
Posts: 415
Default Cisco Dial Plan!


Hmm, i don't understand any of it either!

Hopefully someone does......
  #6  
Old May 30th 06, 11:56 PM posted to uk.telecom.voip
JW
external usenet poster
 
Posts: 83
Default Cisco Dial Plan!

Sean wrote:
I need help with a Cisco dial plan please, i need to be able to dial *8,
which i dont think i currently can.

*St4-|#St4-|911|1#t8.r9t2-|0#t811.rat4-|^1t4#.- is current dial plan,
and makes little sense to me


This should explain it:
http://www.cisco.com/en/US/products/...3.html#1021559
or http://tinyurl.com/o2l6y

AIUI, "S" voids any other dial plan entries, "t" is the
inter-digit timer (indicates time-outs before sending) and
"-" indicates other digits can be dialled, so the first
entry means you can dial "*" and other digits and the
entered string will be sent 4 seconds after the last digit
entry.
  #7  
Old May 31st 06, 02:25 PM posted to uk.telecom.voip
sean
external usenet poster
 
Posts: 415
Default Cisco Dial Plan!

JW wrote:
Sean wrote:
I need help with a Cisco dial plan please, i need to be able to dial
*8, which i dont think i currently can.

*St4-|#St4-|911|1#t8.r9t2-|0#t811.rat4-|^1t4#.- is current dial
plan, and makes little sense to me


This should explain it:
http://www.cisco.com/en/US/products/...3.html#1021559

or http://tinyurl.com/o2l6y

AIUI, "S" voids any other dial plan entries, "t" is the inter-digit
timer (indicates time-outs before sending) and "-" indicates other
digits can be dialled, so the first entry means you can dial "*" and
other digits and the entered string will be sent 4 seconds after the
last digit entry.

So, *8 should work and send 4 seconds after its dialed.. But it does not
seem to work
 




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dial voipcheap from dial plan John DH uk.telecom.voip (UK VOIP) 6 February 1st 06 09:58 PM
Sipura Dial Plan Matt uk.telecom.voip (UK VOIP) 3 November 23rd 05 06:32 PM
Dial Plan - PAP2? ras uk.telecom.voip (UK VOIP) 5 October 3rd 05 04:32 PM
Fwd Dial Plan ras uk.telecom.voip (UK VOIP) 4 October 1st 05 08:25 PM
UK Dial plan Andrew Gabriel uk.telecom.voip (UK VOIP) 31 July 21st 05 08:30 PM


All times are GMT +1. The time now is 03:08 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.Content Relevant URLs by vBSEO 2.4.0
Copyright ©2004-2019 BroadbanterBanter.
The comments are property of their posters.