A Broadband and ADSL forum. BroadbanterBanter

Welcome to BroadbanterBanter.

You are currently viewing as a guest which gives you limited access to view most discussions and other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today.

Go Back   Home » BroadbanterBanter forum » Newsgroup Discussions » uk.telecom.voip (UK VOIP)
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

uk.telecom.voip (UK VOIP) (uk.telecom.voip) Discussion of topics relevant to packet based voice technologies including Voice over IP (VoIP), Fax over IP (FoIP), Voice over Frame Relay (VoFR), Voice over Broadband (VoB) and Voice on the Net (VoN) as well as service providers, hardware and software for use with these technologies. Advertising is not allowed.

Upgrading firmware on a SPA3000



 
 
Thread Tools Display Modes
  #1  
Old July 11th 06, 01:43 PM posted to uk.telecom.voip
Thomas Sandford
external usenet poster
 
Posts: 39
Default Upgrading firmware on a SPA3000

I have a Sipura SPA3000, still running its original firmware. Is there any
compelling reason _not_ to upgrade it to the latest version on the Sipura
Website?

Hardware version: 2.0.1(0875)
Software Version: 2.0.11(GWg)

Current Software version on Sipura site: 3.1.10

--
Thomas Sandford


  #2  
Old July 11th 06, 02:52 PM posted to uk.telecom.voip
Tim
external usenet poster
 
Posts: 385
Default Upgrading firmware on a SPA3000

Peter Gradwell wrote:

no. v3 firmware is much better


Agreed.

In particular the SPA-3000 will work like a proper SIP gateway
- with no registration
- It won't answer the PSTN until the SIP OK comes back.


Tim
  #3  
Old July 11th 06, 03:41 PM posted to uk.telecom.voip
Peter Gradwell
external usenet poster
 
Posts: 128
Default Upgrading firmware on a SPA3000

Thomas Sandford wrote:
I have a Sipura SPA3000, still running its original firmware. Is there any
compelling reason _not_ to upgrade it to the latest version on the Sipura
Website?

Hardware version: 2.0.1(0875)
Software Version: 2.0.11(GWg)

Current Software version on Sipura site: 3.1.10


no. v3 firmware is much better


peter

--
peter gradwell. gradwell dot com Ltd. http://www.gradwell.com/
-- engineering & hosting services for email, web and voip --
-- http://www.peter.me.uk/ -- http://www.voip.org.uk/ --
  #4  
Old July 11th 06, 03:46 PM posted to uk.telecom.voip
Lee
external usenet poster
 
Posts: 85
Default Upgrading firmware on a SPA3000


"Tim" wrote in message
...
Peter Gradwell wrote:

no. v3 firmware is much better


Agreed.

In particular the SPA-3000 will work like a proper SIP gateway
- with no registration
- It won't answer the PSTN until the SIP OK comes back.


A Ha!
Thank you.
So, an SPA-3000 purchased a long time ago with 2.x series firmware will
"make the leap" to 3.x? No hardware differences?

L


  #5  
Old July 11th 06, 04:16 PM posted to uk.telecom.voip
Paul Hayes
external usenet poster
 
Posts: 43
Default Upgrading firmware on a SPA3000

Lee wrote:
"Tim" wrote in message
...
Peter Gradwell wrote:
no. v3 firmware is much better

Agreed.

In particular the SPA-3000 will work like a proper SIP gateway
- with no registration
- It won't answer the PSTN until the SIP OK comes back.


A Ha!
Thank you.
So, an SPA-3000 purchased a long time ago with 2.x series firmware will
"make the leap" to 3.x? No hardware differences?

L



Yes, any SPA3000 will work with version 3+ firmware.

cheers,
Paul.
  #6  
Old July 11th 06, 04:20 PM posted to uk.telecom.voip
Lee
external usenet poster
 
Posts: 85
Default Upgrading firmware on a SPA3000


"paul hayes" wrote in message
...
Lee wrote:
"Tim" wrote in message
...
Peter Gradwell wrote:
no. v3 firmware is much better

Agreed.

In particular the SPA-3000 will work like a proper SIP gateway
- with no registration
- It won't answer the PSTN until the SIP OK comes back.


A Ha!
Thank you.
So, an SPA-3000 purchased a long time ago with 2.x series firmware will
"make the leap" to 3.x? No hardware differences?

L



Yes, any SPA3000 will work with version 3+ firmware.


Many thanks.

L


  #7  
Old July 11th 06, 04:55 PM posted to uk.telecom.voip
Thomas Sandford
external usenet poster
 
Posts: 39
Default Upgrading firmware on a SPA3000

"Lee" wrote in message
...
"paul hayes" wrote in message
Lee wrote:
"Tim" wrote in message
Peter Gradwell wrote:
no. v3 firmware is much better
Agreed.

In particular the SPA-3000 will work like a proper SIP gateway
- with no registration
- It won't answer the PSTN until the SIP OK comes back.

A Ha!
Thank you.
So, an SPA-3000 purchased a long time ago with 2.x series firmware will
"make the leap" to 3.x? No hardware differences?


Yes, any SPA3000 will work with version 3+ firmware.


Many thanks.

L


And thanks too from the OP to all the posters to this thread.

--
Thomas Sandford


  #8  
Old July 12th 06, 02:56 PM posted to uk.telecom.voip
Lee
external usenet poster
 
Posts: 85
Default Upgrading firmware on a SPA3000


"Thomas Sandford" wrote in message
...
"Lee" wrote in message
...
"paul hayes" wrote in message

Yes, any SPA3000 will work with version 3+ firmware.


Many thanks.

L


And thanks too from the OP to all the posters to this thread.

Many thanks from me to the OP for the original post that triggered
clarification of something that has been bugging me for a couple of years.
:-)


  #9  
Old July 13th 06, 10:39 AM posted to uk.telecom.voip
Boonie...
external usenet poster
 
Posts: 4
Default Upgrading firmware on a SPA3000


"Thomas Sandford" schreef in bericht
...
I have a Sipura SPA3000, still running its original firmware. Is there any
compelling reason _not_ to upgrade it to the latest version on the Sipura
Website?

Hardware version: 2.0.1(0875)
Software Version: 2.0.11(GWg)

Current Software version on Sipura site: 3.1.10


Thanks to all. I had the same question and upgraded succesfully just a few
minutes ago.

Boonie


 




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Upgrading firmware (1.1 to 1.8) on BT Voyager 2005 ADSL modem - Web interface broken Clive uk.telecom.broadband (UK broadband) 4 October 26th 05 10:53 PM
Upgrading to broadband John Allerton uk.telecom.broadband (UK broadband) 6 June 21st 05 04:07 PM
Zen any upgrading likely? Ken uk.telecom.broadband (UK broadband) 3 February 28th 05 09:10 PM
upgrading from USB modem steve church uk.telecom.broadband (UK broadband) 10 January 10th 05 12:48 PM
Upgrading 512kb to 1mb - BT say no Sir Tom West uk.telecom.broadband (UK broadband) 11 October 18th 03 03:41 PM


All times are GMT +1. The time now is 05:34 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.Content Relevant URLs by vBSEO 2.4.0
Copyright 2004-2020 BroadbanterBanter.
The comments are property of their posters.