A Broadband and ADSL forum. BroadbanterBanter

Welcome to BroadbanterBanter.

You are currently viewing as a guest which gives you limited access to view most discussions and other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today.

Go Back   Home » BroadbanterBanter forum » Newsgroup Discussions » uk.telecom.voip (UK VOIP)
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

uk.telecom.voip (UK VOIP) (uk.telecom.voip) Discussion of topics relevant to packet based voice technologies including Voice over IP (VoIP), Fax over IP (FoIP), Voice over Frame Relay (VoFR), Voice over Broadband (VoB) and Voice on the Net (VoN) as well as service providers, hardware and software for use with these technologies. Advertising is not allowed.

ATA: 2 exts with one PSTN and several SIP



 
 
Thread Tools Display Modes
  #1  
Old August 31st 06, 05:07 PM posted to uk.telecom.voip
external usenet poster
 
Posts: n/a
Default ATA: 2 exts with one PSTN and several SIP

I'm interested in an ATA with two internal extension ports and one
(analogue) PSTN connection. I'd like one of the internal ports always to
default to the PSTN line, but allow routing via at least one SIP provider
given some particular key sequence prefix (e.g. #001*, or whatever). The
other should default to one of the SIP providers, but allow routing via
either PSTN or any of the other SIP provders given some particular key
sequence prefix.

Pricing would ideally be towards the lower end of the market but
definitely sub-100.

Any suggestions, please?

Many thanks,
Chris
  #2  
Old August 31st 06, 08:50 PM posted to uk.telecom.voip
external usenet poster
 
Posts: n/a
Default ATA: 2 exts with one PSTN and several SIP

Chris Davies submitted this idea :
I'm interested in an ATA with two internal extension ports and one
(analogue) PSTN connection. I'd like one of the internal ports always to
default to the PSTN line, but allow routing via at least one SIP provider
given some particular key sequence prefix (e.g. #001*, or whatever). The
other should default to one of the SIP providers, but allow routing via
either PSTN or any of the other SIP provders given some particular key
sequence prefix.

Pricing would ideally be towards the lower end of the market but
definitely sub-100.

Any suggestions, please?

Many thanks,
Chris


Perhaps
http://www.avm.de/en/Produkte/FRITZBox/FRITZ_Box_Fon_ata/index.html ?


  #3  
Old August 31st 06, 10:04 PM posted to uk.telecom.voip
external usenet poster
 
Posts: n/a
Default ATA: 2 exts with one PSTN and several SIP


Chris Davies wrote:
I'm interested in an ATA with two internal extension ports and one
(analogue) PSTN connection. I'd like one of the internal ports always to
default to the PSTN line, but allow routing via at least one SIP provider
given some particular key sequence prefix (e.g. #001*, or whatever). The
other should default to one of the SIP providers, but allow routing via
either PSTN or any of the other SIP provders given some particular key
sequence prefix.

Pricing would ideally be towards the lower end of the market but
definitely sub-100.

Any suggestions, please?


You get what you pay for (more or less).

Around the 100 squid mark is the Fritz!box (with vat and delivery)
which, configured correctly, will do all you want.

At about half that price, with some limitations, the grandstream 386
ATA doesn't do exactly what you want, but can work around it-ish. It
doesn't default to PSTN on either port, though, with a dialled prefix,
your PSTN can be used. Each port would need its own SIP
provider/account as there is no dial plan to choose SIP provider when
dialling - whereas on the fritzbox, I believe, you can dial out from
port 1 using account 1 or 2 etc.

  #4  
Old September 1st 06, 02:10 AM posted to uk.telecom.voip
external usenet poster
 
Posts: n/a
Default ATA: 2 exts with one PSTN and several SIP

"Jono" wrote
in message
yonder.com.co.uk
Chris Davies submitted this idea :
I'm interested in an ATA with two internal extension
ports and one (analogue) PSTN connection. I'd like one
of the internal ports always to default to the PSTN
line, but allow routing via at least one SIP provider
given some particular key sequence prefix (e.g. #001*,
or whatever). The other should default to one of the
SIP providers, but allow routing via either PSTN or any
of the other SIP provders given some particular key
sequence prefix. Pricing would ideally be towards the lower end of
the
market but definitely sub-100.

Any suggestions, please?

Many thanks,
Chris


Perhaps
http://www.avm.de/en/Produkte/FRITZBox/FRITZ_Box_Fon_ata/index.html
?


That will certainly do it, but not sure of the price, is it under 100..?
I personally prefer the version with the built in ADSL modem and router,
that way you get QoS and it's one less power supply plug..!

Ivor


  #5  
Old September 1st 06, 02:13 AM posted to uk.telecom.voip
external usenet poster
 
Posts: n/a
Default ATA: 2 exts with one PSTN and several SIP

"paul123" wrote in message
ups.com

[snip]

You get what you pay for (more or less).

Around the 100 squid mark is the Fritz!box (with vat and
delivery) which, configured correctly, will do all you
want.

At about half that price, with some limitations, the
grandstream 386 ATA doesn't do exactly what you want, but
can work around it-ish. It doesn't default to PSTN on
either port, though, with a dialled prefix, your PSTN can
be used. Each port would need its own SIP
provider/account as there is no dial plan to choose SIP
provider when dialling - whereas on the fritzbox, I
believe, you can dial out from port 1 using account 1 or
2 etc.


You can dial out on any of the 10 available accounts from either phone
port. It's a bit fiddly though as the prefix codes required are rather
long, but it's certainly usable.

Ivor


  #6  
Old September 4th 06, 04:44 PM posted to uk.telecom.voip
external usenet poster
 
Posts: n/a
Default ATA: 2 exts with one PSTN and several SIP

Thanks to you all for your suggestions.
Chris
 




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
PSTN to Voip Woggle uk.telecom.voip (UK VOIP) 12 March 22nd 07 01:09 AM
pstn registration grumpy uk.telecom.voip (UK VOIP) 5 May 5th 06 05:44 PM
SIP to PSTN CEO uk.telecom.voip (UK VOIP) 0 April 30th 06 11:43 AM
Can USB phone and MSN get out onto PSTN? Joe Harrison uk.telecom.voip (UK VOIP) 0 November 27th 05 04:51 PM
ATA that defaults to PSTN Phil uk.telecom.voip (UK VOIP) 3 June 21st 05 10:19 AM


All times are GMT +1. The time now is 05:38 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.Content Relevant URLs by vBSEO 2.4.0
Copyright 2004-2019 BroadbanterBanter.
The comments are property of their posters.