A Broadband and ADSL forum. BroadbanterBanter

Welcome to BroadbanterBanter.

You are currently viewing as a guest which gives you limited access to view most discussions and other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today.

Go Back   Home » BroadbanterBanter forum » Newsgroup Discussions » uk.telecom.voip (UK VOIP)
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

uk.telecom.voip (UK VOIP) (uk.telecom.voip) Discussion of topics relevant to packet based voice technologies including Voice over IP (VoIP), Fax over IP (FoIP), Voice over Frame Relay (VoFR), Voice over Broadband (VoB) and Voice on the Net (VoN) as well as service providers, hardware and software for use with these technologies. Advertising is not allowed.

Looks like the week for dial plan help...`



 
 
Thread Tools Display Modes
  #1  
Old October 4th 06, 08:52 PM posted to uk.telecom.voip
linker3000
external usenet poster
 
Posts: 75
Default Looks like the week for dial plan help...`

OK guys - here's another one...

I've set up a Linksys/Sipura 3102 with Asterisk. It works OK but not
reliably - ie: I can use it to ring other IP phones on the network or
can call it from other phones for a few times and then it needs a
reboot. I'm currently playing with the SIP settings but any ideas would
be appreciated. Haven't even hooked it up to the PSTN yet.

I've also found that although I have enabled the Web interface from the
'Internet' side, the interface dies after a minute or so, but it works
fine from the 'local' side.

Anyway - can anyone advise on a dial plan that will do the following:

All outbound calls to go out via VoIP EXCEPT 999 and 112 which should
use the PSTN line. Calls starting 9 also to go out via PSTN (eg: '9' for
a PSTN line - like 901234 567 8900).

Thanks
  #2  
Old October 5th 06, 03:27 PM posted to uk.telecom.voip
Brian A
external usenet poster
 
Posts: 1,037
Default Looks like the week for dial plan help...`

On Wed, 04 Oct 2006 20:52:15 +0100, linker3000
wrote:

OK guys - here's another one...

I've set up a Linksys/Sipura 3102 with Asterisk. It works OK but not
reliably - ie: I can use it to ring other IP phones on the network or
can call it from other phones for a few times and then it needs a
reboot. I'm currently playing with the SIP settings but any ideas would
be appreciated. Haven't even hooked it up to the PSTN yet.

I've also found that although I have enabled the Web interface from the
'Internet' side, the interface dies after a minute or so, but it works
fine from the 'local' side.

Anyway - can anyone advise on a dial plan that will do the following:

All outbound calls to go out via VoIP EXCEPT 999 and 112 which should
use the PSTN line. Calls starting 9 also to go out via PSTN (eg: '9' for
a PSTN line - like 901234 567 8900).

Thanks

Are you wanting dial plan help for the SPA-3000 or do you want help
connected with Asterisk?
If it is SPA-3000 can I suggest that you learn the basics of how to
construct a dial plan. Dialing 9 to route all the numbers that need to
go via PSTN is OK for the exception, where your VSP is down, but not
for day to day operations. If you construct your dial plan properly
you should have to think whether a number is going via VOIP or PSTN -
the dial plan should take care of that. Further, as you are developing
you system you may want to make changes, coming back here every time
to get a new dial plan isn't going to be very good regime.
Can I suggest that you take a look at some notes I have made and, if
after that, you are stuck then please come back here for help.
Check out the notes on
http://www.leafcom.co.uk
Remove 'no_spam_' from email address.
Skype Free Zone!!
  #3  
Old October 5th 06, 03:30 PM posted to uk.telecom.voip
Daviey
external usenet poster
 
Posts: 12
Default Looks like the week for dial plan help...`

On Wed, 2006-10-04 at 20:52 +0100, linker3000 wrote:
OK guys - here's another one...

I've set up a Linksys/Sipura 3102 with Asterisk. It works OK but not
reliably - ie: I can use it to ring other IP phones on the network or
can call it from other phones for a few times and then it needs a
reboot. I'm currently playing with the SIP settings but any ideas would
be appreciated. Haven't even hooked it up to the PSTN yet.

I've also found that although I have enabled the Web interface from the
'Internet' side, the interface dies after a minute or so, but it works
fine from the 'local' side.

Anyway - can anyone advise on a dial plan that will do the following:

All outbound calls to go out via VoIP EXCEPT 999 and 112 which should
use the PSTN line. Calls starting 9 also to go out via PSTN (eg: '9' for
a PSTN line - like 901234 567 8900).

Thanks


Hi,

Will your PSTN be attached to the * server or connected to the Sipura
device?

Open up a shell to your * box. If your using Trixbox i believe it
includes a Java SSH client. If not download putty* and login to your
asterisk server (using asterisk's IP). once in type 'asterisk
-rvvvvvv'. This will get you into the asterisk console. When you
make/recieve calls you can see what asterisk is doing. Watch for when
the line ceases and report back what appears on the screen.

Also commands such as 'sip show registry' and 'sip show peers' will give
you some idea of the connection status of the extenions(peers) and voip
provider(registry).

Let us know how you get on!


*Putty client: http://the.earth.li/~sgtatham/putty/.../x86/putty.exe

  #4  
Old October 6th 06, 11:57 AM posted to uk.telecom.voip
Linker3000
external usenet poster
 
Posts: 83
Default Looks like the week for dial plan help...`

Brian A wrote:
On Wed, 04 Oct 2006 20:52:15 +0100, linker3000
wrote:

OK guys - here's another one...

I've set up a Linksys/Sipura 3102 with Asterisk. It works OK but not
reliably - ie: I can use it to ring other IP phones on the network or
can call it from other phones for a few times and then it needs a
reboot. I'm currently playing with the SIP settings but any ideas would
be appreciated. Haven't even hooked it up to the PSTN yet.

I've also found that although I have enabled the Web interface from the
'Internet' side, the interface dies after a minute or so, but it works
fine from the 'local' side.

Anyway - can anyone advise on a dial plan that will do the following:

All outbound calls to go out via VoIP EXCEPT 999 and 112 which should
use the PSTN line. Calls starting 9 also to go out via PSTN (eg: '9' for
a PSTN line - like 901234 567 8900).

Thanks

Are you wanting dial plan help for the SPA-3000 or do you want help
connected with Asterisk?
If it is SPA-3000 can I suggest that you learn the basics of how to
construct a dial plan. Dialing 9 to route all the numbers that need to
go via PSTN is OK for the exception, where your VSP is down, but not
for day to day operations. If you construct your dial plan properly
you should have to think whether a number is going via VOIP or PSTN -
the dial plan should take care of that. Further, as you are developing
you system you may want to make changes, coming back here every time
to get a new dial plan isn't going to be very good regime.
Can I suggest that you take a look at some notes I have made and, if
after that, you are stuck then please come back here for help.
Check out the notes on
http://www.leafcom.co.uk
Remove 'no_spam_' from email address.
Skype Free Zone!!


Hi Brian,

I will have a look at your notes - thanks.

This setup is for a small business with one incoming phone line hence
all outbound calls are planned to go via VoIP to keep the line free for
one inbound call - not ideal but best under the current circumstances.
The system is unlikely to develop any further than this.
  #5  
Old October 6th 06, 12:00 PM posted to uk.telecom.voip
Linker3000
external usenet poster
 
Posts: 83
Default Looks like the week for dial plan help...`

Daviey wrote:
On Wed, 2006-10-04 at 20:52 +0100, linker3000 wrote:
OK guys - here's another one...

I've set up a Linksys/Sipura 3102 with Asterisk. It works OK but not
reliably - ie: I can use it to ring other IP phones on the network or
can call it from other phones for a few times and then it needs a
reboot. I'm currently playing with the SIP settings but any ideas would
be appreciated. Haven't even hooked it up to the PSTN yet.

I've also found that although I have enabled the Web interface from the
'Internet' side, the interface dies after a minute or so, but it works
fine from the 'local' side.

Anyway - can anyone advise on a dial plan that will do the following:

All outbound calls to go out via VoIP EXCEPT 999 and 112 which should
use the PSTN line. Calls starting 9 also to go out via PSTN (eg: '9' for
a PSTN line - like 901234 567 8900).

Thanks


Hi,

Will your PSTN be attached to the * server or connected to the Sipura
device?

Open up a shell to your * box. If your using Trixbox i believe it
includes a Java SSH client. If not download putty* and login to your
asterisk server (using asterisk's IP). once in type 'asterisk
-rvvvvvv'. This will get you into the asterisk console. When you
make/recieve calls you can see what asterisk is doing. Watch for when
the line ceases and report back what appears on the screen.

Also commands such as 'sip show registry' and 'sip show peers' will give
you some idea of the connection status of the extenions(peers) and voip
provider(registry).

Let us know how you get on!


*Putty client: http://the.earth.li/~sgtatham/putty/.../x86/putty.exe

Hi Daviey,

The PSTN will be integrated with the * (Trixbox) system via the SPA3102
- at the moment, the company takes a call on the PSTN line with a DECT
phone and they walk it to the recipient so I want instead for the
inbound PSTN call to be handled by Trixbox so they can transfer it to
the required extension. All other aspects of the system are working fine
- 7 extensions all with inbound 0845 numbers routing to the desks (apart
from inbound fax detection but I an working on it).


 




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help with Dial plan Scope uk.telecom.voip (UK VOIP) 2 October 2nd 06 09:34 PM
Dial Plan Woggle uk.telecom.voip (UK VOIP) 2 July 22nd 06 09:43 PM
Dial voipcheap from dial plan John DH uk.telecom.voip (UK VOIP) 6 February 1st 06 09:58 PM
Fwd Dial Plan ras uk.telecom.voip (UK VOIP) 4 October 1st 05 08:25 PM
UK Dial plan Andrew Gabriel uk.telecom.voip (UK VOIP) 31 July 21st 05 08:30 PM


All times are GMT +1. The time now is 05:23 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.Content Relevant URLs by vBSEO 2.4.0
Copyright 2004-2019 BroadbanterBanter.
The comments are property of their posters.