View Single Post
Old November 2nd 18, 04:51 PM posted to uk.telecom.broadband
Graham J[_2_]
external usenet poster
Posts: 723
Default VDSL VLAN tag question

Using a Vigor 2860 router with WAN1 connected to a VDSL service, it is
necessary to enable the VLAN tag with value=101.

Can anybody explain what this actually does?

I want to use a Vigor 2830 (which does not support VDSL) so I will
connect its WAN2 port to an Ethernet modem that does support VDSL.
Question: should I set the VLAN tag to 101 on the WAN2 port?

Graham J