A Broadband and ADSL forum. BroadbanterBanter

Welcome to BroadbanterBanter.

You are currently viewing as a guest which gives you limited access to view most discussions and other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today.

Go Back   Home » BroadbanterBanter forum » Newsgroup Discussions » uk.telecom.voip (UK VOIP)
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

uk.telecom.voip (UK VOIP) (uk.telecom.voip) Discussion of topics relevant to packet based voice technologies including Voice over IP (VoIP), Fax over IP (FoIP), Voice over Frame Relay (VoFR), Voice over Broadband (VoB) and Voice on the Net (VoN) as well as service providers, hardware and software for use with these technologies. Advertising is not allowed.

[email protected] 2.7 PROBLEMS (2)



 
 
Thread Tools Display Modes
  #1  
Old December 10th 07, 08:55 AM posted to uk.telecom.voip
phpguy
external usenet poster
 
Posts: 32
Default [email protected] 2.7 PROBLEMS (2)

in responce to [email protected] 2.7 PROBLEMS (part 1) to juno


hello tere, yes juno is rtight , i dont now what yum is and what
updates to install ad why revuilt zaptel as both are fresh
installation and not upgrade

1.4 is fresh install on one pc and 2.7 fresh install on another

any help ? juno remembers me well i see hello mate
  #2  
Old December 10th 07, 08:43 PM posted to uk.telecom.voip
Jono
external usenet poster
 
Posts: 1,539
Default [email protected] 2.7 PROBLEMS (2)

After serious thinking phpguy wrote :
in responce to [email protected] 2.7 PROBLEMS (part 1) to juno


hello tere, yes juno is rtight , i dont now what yum


You is simply the updater (like Windows update) for CentOS. If you yum
CentOS, it breaks Zaptel.

is and what
updates to install ad why revuilt zaptel as both are fresh
installation and not upgrade

1.4 is fresh install on one pc and 2.7 fresh install on another


To avoid confusion - are you saying that both boxes have [email protected]
on them? However, one is running [email protected] v1.4 and the other running [email protected]
v2.7.

any help ?


As Desk Rabbit says, make the same call on both boxes whilst logged
into the Asterisk CLI.

Copy & paste the output of the CLI for both here.

jono remembers me well i see hello mate


I do, I do.


  #3  
Old December 10th 07, 08:59 PM posted to uk.telecom.voip
Jono
external usenet poster
 
Posts: 1,539
Default [email protected] 2.7 PROBLEMS (2)

Jono expressed precisely :
After serious thinking phpguy wrote :
in responce to [email protected] 2.7 PROBLEMS (part 1) to juno


hello tere, yes juno is rtight , i dont now what yum


You is simply the updater (like Windows update) for CentOS. If you yum


Duh! "Yum" is simply the updater


  #4  
Old December 10th 07, 11:12 PM posted to uk.telecom.voip
phpguy
external usenet poster
 
Posts: 32
Default [email protected] 2.7 PROBLEMS (2)

hi yes 2 boxes have both fresh install of [email protected] but different
versions one has 1.4 the other 2.7

the one im using is 1.4 now and the 2.7 im test driving it before i
move to that so if anything happens my phones wont all be down

the log from 2.7 is


login as: root
's password:
Last login: Wed Dec 5 18:52:07 2007 from 192.168.100.6

Welcome to [email protected]
-------------------------------------------------

For access to the [email protected] web GUI use this URL
http://192.168.100.70

For help on [email protected] commands you can use from this
command shell type help-aah.

[[email protected] ~]# asterisk -r
Asterisk 1.2.5, Copyright (C) 1999 - 2006 Digium, Inc. and others.
Created by Mark Spencer
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty' for
details.
This is free software, with components licensed under the GNU General
Public
License version 2 and other licenses; you are welcome to redistribute
it under
certain conditions. Type 'show license' for details.
================================================== =======================
Connected to Asterisk 1.2.5 currently running on asterisk1 (pid =
2659)
NIX connection
Verbosity is at least 3
asterisk1*CLI set verbose 5
Verbosity was 3 and is now 5
-- Saved useragent "Sipura/SPA921-4.1.10(b)" for peer 200
-- Executing Macro("SIP/200-7adb", "dialout-trunk|1|2107236397|")
in new stack
-- Executing GotoIf("SIP/200-7adb", "1?3:2)") in new stack
-- Goto (macro-dialout-trunk,s,3)
-- Executing Macro("SIP/200-7adb", "user-callerid") in new stack
-- Executing DBget("SIP/200-7adb", "AMPUSER=DEVICE/200/user") in
new stack
-- DBget: varname=AMPUSER, family=DEVICE, key=200/user
-- DBget: set variable AMPUSER to 200
-- Executing DBget("SIP/200-7adb", "AMPUSERCIDNAME=AMPUSER/200/
cidname") in new stack
-- DBget: varname=AMPUSERCIDNAME, family=AMPUSER, key=200/cidname
-- DBget: set variable AMPUSERCIDNAME to KOSTAS
-- Executing GotoIf("SIP/200-7adb", "0?5") in new stack
-- Executing SetCallerID("SIP/200-7adb", ""KOSTAS" 200") in new
stack
-- Executing NoOp("SIP/200-7adb", "Using CallerID "KOSTAS" 200")
in new stack
-- Executing Macro("SIP/200-7adb", "record-enable|200|OUT") in new
stack
-- Executing GotoIf("SIP/200-7adb", "0 0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing AGI("SIP/200-7adb", "recordingcheck|20071210-180545|
1197327945.0") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20071210-180545|1197327945.0: Outbound recording not
enabled
-- AGI Script recordingcheck completed, returning 0
-- Executing NoOp("SIP/200-7adb", "No recording needed") in new
stack
-- Executing Macro("SIP/200-7adb", "outbound-callerid|1") in new
stack
-- Executing DBget("SIP/200-7adb", "USEROUTCID=AMPUSER/200/
outboundcid") in new stack
-- DBget: varname=USEROUTCID, family=AMPUSER, key=200/outboundcid
-- DBget: set variable USEROUTCID to
-- Executing GotoIf("SIP/200-7adb", "0?4") in new stack
-- Executing SetCallerID("SIP/200-7adb", "2107292105") in new
stack
-- Executing GotoIf("SIP/200-7adb", "1?6") in new stack
-- Goto (macro-outbound-callerid,s,6)
-- Executing NoOp("SIP/200-7adb", "CallerID set to 2107292105") in
new stack
-- Executing SetGroup("SIP/200-7adb", "OUT_1") in new stack
-- Executing CheckGroup("SIP/200-7adb", "1") in new stack
-- Executing SetVar("SIP/200-7adb", "DIAL_NUMBER=2107236397") in
new stack
-- Executing SetVar("SIP/200-7adb", "DIAL_TRUNK=1") in new stack
-- Executing AGI("SIP/200-7adb", "fixlocalprefix") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
fixlocalprefix: Could not parse /etc/asterisk/localprefixes.conf
-- AGI Script fixlocalprefix completed, returning 0
-- Executing SetVar("SIP/200-7adb", "OUTNUM=2107236397") in new
stack
-- Executing Cut("SIP/200-7adb", "custom=OUT_1|:|1") in new stack
-- Executing GotoIf("SIP/200-7adb", "0?16") in new stack
-- Executing Dial("SIP/200-7adb", "ZAP/1/2107236397") in new stack
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing Goto("SIP/200-7adb", "s-CHANUNAVAIL|1") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
-- Executing NoOp("SIP/200-7adb", "Dial failed due to
CHANUNAVAIL") in new stack
-- Executing Macro("SIP/200-7adb", "outisbusy") in new stack
-- Executing Playback("SIP/200-7adb", "all-circuits-busy-now") in
new stack
-- Playing 'all-circuits-busy-now' (language 'en')
-- Executing Playback("SIP/200-7adb", "pls-try-call-later") in new
stack
-- Playing 'pls-try-call-later' (language 'en')
-- Executing Macro("SIP/200-7adb", "hangupcall") in new stack
-- Executing ResetCDR("SIP/200-7adb", "w") in new stack
-- Executing NoCDR("SIP/200-7adb", "") in new stack
-- Executing Wait("SIP/200-7adb", "5") in new stack
== Spawn extension (macro-hangupcall, s, 3) exited non-zero on 'SIP/
200-7adb' in macro 'hangupcall'
== Spawn extension (macro-hangupcall, s, 3) exited non-zero on 'SIP/
200-7adb' in macro 'outisbusy'
== Spawn extension (macro-hangupcall, s, 3) exited non-zero on 'SIP/
200-7adb'
asterisk1*CLI


///////////////////////////////////

and log from 1.4 (that works) is:


login as: root
's password:
Last login: Thu Dec 6 01:46:20 2007 from 192.168.100.6
[[email protected] root]# asterisk -r
Asterisk 1.0.9, Copyright (C) 1999-2004 Digium.
Written by Mark Spencer
================================================== =======================
Connected to Asterisk 1.0.9 currently running on asterisk1 (pid =
1328)
Verbosity is at least 3
asterisk1*CLI set verbose 5
Verbosity was 3 and is now 5
-- Registered SIP '200' at 192.168.100.15 port 5060 expires 3600
-- Executing Macro("SIP/200-93f9", "dialout-trunk|1|2107236397|")
in new stack
-- Executing GotoIf("SIP/200-93f9", "1?3:2)") in new stack
-- Goto (macro-dialout-trunk,s,3)
-- Executing Macro("SIP/200-93f9", "record-enable|200|OUT") in new
stack
-- Executing GotoIf("SIP/200-93f9", "0 0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing GotoIf("SIP/200-93f9", "1?5:8") in new stack
-- Goto (macro-record-enable,s,5)
-- Executing DBget("SIP/200-93f9", "RecEnable=RECORD-OUT/200") in
new stack
-- DBget: varname=RecEnable, family=RECORD-OUT, key=200
-- DBget: Value not found in database.
-- Executing SetVar("SIP/200-93f9",
"CALLFILENAME=OUT200-20071211-012759-1197354479.262") in new stack
-- Executing Goto("SIP/200-93f9", "s|14") in new stack
-- Goto (macro-record-enable,s,14)
-- Executing GotoIf("SIP/200-93f9", "0?15:99") in new stack
-- Goto (macro-record-enable,s,99)
-- Executing NoOp("SIP/200-93f9", "NO RECORDING NEEDED") in new
stack
-- Executing GotoIf("SIP/200-93f9", "1?7") in new stack
-- Goto (macro-dialout-trunk,s,7)
-- Executing GotoIf("SIP/200-93f9", "0?9") in new stack
-- Executing SetCallerID("SIP/200-93f9", "2107292105") in new
stack
-- Executing SetGroup("SIP/200-93f9", "OUT_1") in new stack
-- Executing CheckGroup("SIP/200-93f9", "1") in new stack
-- Executing SetVar("SIP/200-93f9", "DIAL_NUMBER=2107236397") in
new stack
-- Executing SetVar("SIP/200-93f9", "DIAL_TRUNK=1") in new stack
-- Executing AGI("SIP/200-93f9", "fixlocalprefix") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
fixlocalprefix: Could not parse /etc/asterisk/localprefixes.conf
-- AGI Script fixlocalprefix completed, returning 0
-- Executing SetVar("SIP/200-93f9", "OUTNUM=2107236397") in new
stack
-- Executing Cut("SIP/200-93f9", "custom=OUT_1|:|1") in new stack
-- Executing GotoIf("SIP/200-93f9", "0?19") in new stack
-- Executing Dial("SIP/200-93f9", "ZAP/1/2107236397") in new stack
-- Called 1/2107236397
-- Zap/1-1 answered SIP/200-93f9
-- Hungup 'Zap/1-1'
== Spawn extension (macro-dialout-trunk, s, 17) exited non-zero on
'SIP/200-93f9' in macro 'dialout-trunk'
== Spawn extension (from-internal, 992107236397, 1) exited non-zero
on 'SIP/200-93f9'
-- Executing Macro("SIP/200-93f9", "hangupcall") in new stack
-- Executing ResetCDR("SIP/200-93f9", "w") in new stack
-- Executing NoCDR("SIP/200-93f9", "") in new stack
-- Executing Wait("SIP/200-93f9", "5") in new stack
== Spawn extension (macro-hangupcall, s, 3) exited non-zero on 'SIP/
200-93f9' in macro 'hangupcall'
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/
200-93f9'
asterisk1*CLI





 




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
[email protected] 2.7 PROBLEMS phpguy uk.telecom.voip (UK VOIP) 16 December 15th 07 06:57 PM
[email protected] QUESTIONS AND PROBLEMS phpguy uk.telecom.voip (UK VOIP) 10 November 26th 07 07:30 AM
[email protected] {{{{{Welcome}}}}} uk.telecom.voip (UK VOIP) 7 April 22nd 06 10:37 PM
Asterisk at Home Matt uk.telecom.voip (UK VOIP) 1 July 15th 05 10:59 PM
asterisk @ Home - Help Please? RH uk.telecom.voip (UK VOIP) 2 July 5th 05 06:28 PM


All times are GMT +1. The time now is 02:26 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.Content Relevant URLs by vBSEO 2.4.0
Copyright 2004-2019 BroadbanterBanter.
The comments are property of their posters.