A Broadband and ADSL forum. BroadbanterBanter

Welcome to BroadbanterBanter.

You are currently viewing as a guest which gives you limited access to view most discussions and other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today.

Go Back   Home » BroadbanterBanter forum » Newsgroup Discussions » uk.telecom.voip (UK VOIP)
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

uk.telecom.voip (UK VOIP) (uk.telecom.voip) Discussion of topics relevant to packet based voice technologies including Voice over IP (VoIP), Fax over IP (FoIP), Voice over Frame Relay (VoFR), Voice over Broadband (VoB) and Voice on the Net (VoN) as well as service providers, hardware and software for use with these technologies. Advertising is not allowed.

PAP2 setup really basic questions...



 
 
Thread Tools Display Modes
  #1  
Old March 18th 08, 07:38 PM posted to uk.telecom.voip
Adam Aglionby
external usenet poster
 
Posts: 33
Default PAP2 setup really basic questions...

"Can't connect to login server" problem with PAP2 connected to Dlink
DL624 router attempting to connect to Voiptalk.

My networking knowledge is very limited.

Have assigned Pap2 a static IP and put that IP in the routers DMZ.

Followed the Voiptalk setup about entering user and pass but get the
feeling am misssing out entering settngs in main system page.

Gateway,netmask, primary dns dont have entries which kind of suspect
they should....

Any advice gratefully received.

Thanks
Adam


  #2  
Old March 18th 08, 09:58 PM posted to uk.telecom.voip
Roger Mills
external usenet poster
 
Posts: 368
Default PAP2 setup really basic questions...

In an earlier contribution to this discussion,
Adam Aglionby wrote:

"Can't connect to login server" problem with PAP2 connected to Dlink
DL624 router attempting to connect to Voiptalk.

My networking knowledge is very limited.

Have assigned Pap2 a static IP and put that IP in the routers DMZ.

Followed the Voiptalk setup about entering user and pass but get the
feeling am misssing out entering settngs in main system page.

Gateway,netmask, primary dns dont have entries which kind of suspect
they should....

Indeed - you need all of these! Gateway is your router's LAN IP address.
Netmask should be the same as the router's netmask (and of all the PCs on
your LAN). Primary and secondary DNS addresses can be the IP addresses of
any valid DNS servers, but it's usual to make them the same as those in your
router and/or PCs.

The PAP2's static IP address must be unique, but in the same subnet as the
router and PCs (but not in the range of addresses dished out by the router
when acting as a DHCP server - if you are using that function).

HTH!
--
Cheers,
Roger
______
Email address maintained for newsgroup use only, and not regularly
monitored.. Messages sent to it may not be read for several weeks.
PLEASE REPLY TO NEWSGROUP!


  #3  
Old March 19th 08, 10:09 AM posted to uk.telecom.voip
Flyer
external usenet poster
 
Posts: 95
Default PAP2 setup really basic questions...


"Adam Aglionby" wrote in message
...
"Can't connect to login server" problem with PAP2 connected to Dlink
DL624 router attempting to connect to Voiptalk.

My networking knowledge is very limited.

Have assigned Pap2 a static IP and put that IP in the routers DMZ.

Followed the Voiptalk setup about entering user and pass but get the
feeling am misssing out entering settngs in main system page.

Gateway,netmask, primary dns dont have entries which kind of suspect
they should....

Any advice gratefully received.


Do as Roger suggests, and if it still doesn't work, try the following

Logi into PAP2, go into Admin settings, advanced view

On SIP page, near bottom, set Subst via Addr toYes
in EXT IP put the external (ie Internet) IP from your router.

That will hopefully avoid a NAT Traversal problem had with the PAP2 &
Draytel.
You'll need to change the EXT IP address if your router ever shows the
external IP address has changed, otherwise it might not work ;-)

P.


  #4  
Old March 20th 08, 12:23 PM posted to uk.telecom.voip
Adam Aglionby
external usenet poster
 
Posts: 33
Default PAP2 setup really basic questions...

On Mar 19, 10:09 am, "Flyer" wrote:
"Adam Aglionby" wrote in message

...

"Can't connect to login server" problem with PAP2 connected to Dlink
DL624 router attempting to connect to Voiptalk.


My networking knowledge is very limited.


Have assigned Pap2 a static IP and put that IP in the routers DMZ.


Followed the Voiptalk setup about entering user and pass but get the
feeling am misssing out entering settngs in main system page.


Gateway,netmask, primary dns dont have entries which kind of suspect
they should....


Any advice gratefully received.


Do as Roger suggests, and if it still doesn't work, try the following

Logi into PAP2, go into Admin settings, advanced view

On SIP page, near bottom, set Subst via Addr toYes
in EXT IP put the external (ie Internet) IP from your router.

That will hopefully avoid a NAT Traversal problem had with the PAP2 &
Draytel.
You'll need to change the EXT IP address if your router ever shows the
external IP address has changed, otherwise it might not work ;-)

P.


Thanks for the help guys!

Tracked down by another pair of eyes , not a setting on Pap, but on
router had tried to put the PAP on a DMZ address outside the range of
the rest of addresses the router was dishing out , oops, included PAP2
in address range and the lines came up, phew.

No doubt be back withj more questions on sipswitch,

Thanks again :-)
Adam
 




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Some PAP2 questions Dave Saville uk.telecom.voip (UK VOIP) 4 June 1st 06 05:07 PM
Unlocked PAP2 Questions John Smith uk.telecom.voip (UK VOIP) 1 September 8th 05 10:10 PM
Basic Questions- please help! Steven Mills uk.telecom.broadband (UK broadband) 7 April 22nd 04 02:10 PM
Wireless basic questions - please help! Steven Mills uk.comp.home-networking (UK home networking) 7 April 21st 04 09:56 AM
BT Broadband Basic Questions Stevie1308808305 uk.telecom.broadband (UK broadband) 4 April 19th 04 06:44 PM


All times are GMT +1. The time now is 04:28 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.Content Relevant URLs by vBSEO 2.4.0
Copyright 2004-2019 BroadbanterBanter.
The comments are property of their posters.