A Broadband and ADSL forum. BroadbanterBanter

Welcome to BroadbanterBanter.

You are currently viewing as a guest which gives you limited access to view most discussions and other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today.

Go Back   Home » BroadbanterBanter forum » Newsgroup Discussions » uk.telecom.broadband (UK broadband)
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

uk.telecom.broadband (UK broadband) (uk.telecom.broadband) Discussion of broadband services, technology and equipment as provided in the UK. Discussions of specific services based on ADSL, cable modems or other broadband technology are also on-topic. Advertising is not allowed.

Routers



 
 
Thread Tools Display Modes
  #51  
Old February 22nd 19, 07:07 PM posted to uk.telecom.broadband,uk.telecom.mobile
Java Jive
external usenet poster
 
Posts: 419
Default Routers

On 22/02/2019 12:21, Andy Burns wrote:

WooHoo success!

From my previous attempts I was using /dev/ttyUSB1 as the device for
the E3372s which got as far as "dialling" but udhcpd never received an
IP address, changed it to /dev/ttyUSB0 and all is good.

I'm not using the mwan3 load balancing at present, so have to manually
bring up the LTE interface on demand.

"something" got fixed in the dwc2 USB driver in the last year that means
I no longer get the panic I was seeing


Congratulations!

I've got my stick working again on an XP PC and when plugged into my
DrayTek (the one with the dead WiFi). So it looks like the right time
to try it again in the BTHH5a. I did a factory reset on that yesterday,
so could you confirm the exact steps needed from there to get the Huawei
E3372s working?
  #52  
Old February 22nd 19, 07:45 PM posted to uk.telecom.broadband,uk.telecom.mobile
Andy Burns[_5_]
external usenet poster
 
Posts: 357
Default Routers

Java Jive wrote:

I've got my stick working again on an XP PC and when plugged into my
DrayTek (the one with the dead WiFi).* So it looks like the right time
to try it again in the BTHH5a.* I did a factory reset on that yesterday,
so could you confirm the exact steps needed from there to get the Huawei
E3372s working?


The additional packages I install, some of which bring in further
dependencies, some may be unnecessary.
luci-proto-ncm
usb-modeswitch
comgt-ncm
kmod-usb-net-huawei-cdc-ncm
kmod-usb-serial-wwan
kmod-usb-serial-wwan
kmod-usb-serial-option

The stanza for my LTE interface from /etc/config/network

config interface 'LTE'
option ifname 'wwan0'
option proto 'ncm'
option mode 'auto'
option apn '3internet'
option ipv6 'auto'
option delegate '0'
option skipinit '1'
option peerdns '0'
option device '/dev/ttyUSB0'
option pdptype 'IP'
option auto '0'

If you prefer to configure via the GUI, I could take some screenshots.

Place the LTE interface in the wan zone of the firewall, along with the
PPPoE-wan interface (named WAN1 in my case, along with WAN0 to WAN7
which are additional IP addresses specified with /32 masks which lets me
use all eight of them rather than just six using a /29 mask)
  #53  
Old February 22nd 19, 08:03 PM posted to uk.telecom.broadband,uk.telecom.mobile
Andy Burns[_5_]
external usenet poster
 
Posts: 357
Default Routers

Andy Burns wrote:

The stanza for my LTE interface from /etc/config/network


And the output of logread, following an "ifup LTE"

Fri Feb 22 18:54:11 2019 daemon.notice netifd: Interface 'LTE' is
setting up now
Fri Feb 22 18:54:14 2019 daemon.notice netifd: LTE (3874): sending - AT
Fri Feb 22 18:54:14 2019 daemon.notice netifd: LTE (3874): sending - ATZ
Fri Feb 22 18:54:15 2019 daemon.notice netifd: LTE (3874): sending - ATQ0
Fri Feb 22 18:54:15 2019 daemon.notice netifd: LTE (3874): sending - ATV1
Fri Feb 22 18:54:16 2019 daemon.notice netifd: LTE (3874): sending - ATE1
Fri Feb 22 18:54:17 2019 daemon.notice netifd: LTE (3874): sending - ATS0=0
Fri Feb 22 18:54:17 2019 daemon.notice netifd: LTE (3874): sending -
AT+CGDCONT=1,"IP","3internet"
Fri Feb 22 18:54:18 2019 daemon.notice netifd: LTE (3874): Configuring modem
Fri Feb 22 18:54:18 2019 daemon.notice netifd: LTE (3874): Setting mode
Fri Feb 22 18:54:18 2019 daemon.notice netifd: LTE (3874): sending -
AT^SYSCFGEX="00",3fffffff,2,4,7fffffffffffffff,,
Fri Feb 22 18:54:19 2019 daemon.notice netifd: LTE (3874): Starting
network LTE
Fri Feb 22 18:54:19 2019 daemon.notice netifd: LTE (3874): Connecting modem
Fri Feb 22 18:54:20 2019 daemon.notice netifd: LTE (3874): sending -
AT^NDISDUP=1,1,"3internet"
Fri Feb 22 18:54:21 2019 daemon.notice netifd: LTE (3874): Setting up wwan0
Fri Feb 22 18:54:21 2019 daemon.notice netifd: Interface 'LTE' is now up
Fri Feb 22 18:54:21 2019 daemon.notice netifd: Network device 'wwan0'
link is up
Fri Feb 22 18:54:21 2019 daemon.notice netifd: Network alias 'wwan0'
link is up
Fri Feb 22 18:54:21 2019 daemon.notice netifd: Interface 'LTE_4' is enabled
Fri Feb 22 18:54:21 2019 daemon.notice netifd: Interface 'LTE_4' has
link connectivity
Fri Feb 22 18:54:21 2019 daemon.notice netifd: Interface 'LTE_4' is
setting up now
Fri Feb 22 18:54:21 2019 daemon.notice netifd: LTE_4 (3927): udhcpc:
started, v1.28.4
Fri Feb 22 18:54:21 2019 user.notice firewall: Reloading firewall due to
ifup of LTE (wwan0)
Fri Feb 22 18:54:21 2019 daemon.notice netifd: LTE_4 (3927): udhcpc:
sending discover
Fri Feb 22 18:54:22 2019 daemon.info odhcpd[1662]: Using a RA lifetime
of 0 seconds on br-lan
Fri Feb 22 18:54:24 2019 daemon.notice netifd: LTE_4 (3927): udhcpc:
sending discover
Fri Feb 22 18:54:24 2019 daemon.notice netifd: LTE_4 (3927): udhcpc:
sending select for 188.30.53.248
Fri Feb 22 18:54:24 2019 daemon.notice netifd: LTE_4 (3927): udhcpc:
lease of 188.30.53.248 obtained, lease time 518400
Fri Feb 22 18:54:24 2019 daemon.notice netifd: Interface 'LTE_4' is now up

  #54  
Old February 22nd 19, 08:06 PM posted to uk.telecom.broadband,uk.telecom.mobile
Java Jive
external usenet poster
 
Posts: 419
Default Routers

On 22/02/2019 19:03, Andy Burns wrote:
Andy Burns wrote:

The stanza for my LTE interface from /etc/config/network


And the output of logread, following an "ifup LTE"


Thanks Andy, I'll get stuck into that this evening and report back!



 




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Routers and VPN Clients Martin Underwood uk.telecom.broadband (UK broadband) 3 October 8th 05 09:59 PM
VPNs - Cable and ADSL matching routers David W.E. Roberts uk.telecom.broadband (UK broadband) 5 September 7th 05 10:44 AM
Faulty Netgear routers Rupert uk.telecom.broadband (UK broadband) 6 August 14th 05 10:51 AM
BT Yahoo and wireless routers stainless uk.telecom.broadband (UK broadband) 2 July 28th 05 01:38 AM
Why do some routers have problems with filesharing? Chris uk.telecom.broadband (UK broadband) 9 July 14th 05 07:58 PM


All times are GMT +1. The time now is 12:10 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.Content Relevant URLs by vBSEO 2.4.0
Copyright 2004-2019 BroadbanterBanter.
The comments are property of their posters.