I've posted this to the NDO user forum but I might as well post it here as well......... Please help me understand what is going on as I am going to lose sleep if I don't get an explaination to this! OK, I have a network in my home, as I'm sure lots of other people reading this do. Fair enough. Nothing special. There are only 2 or 3 computers on the network, using the 192.168.0.x IP address...

First off, I'm very much the newbie to all this but..... I'd like to get access to my PC remotely but have dynamic IP. I understand there are utilities that will upload your IP address to a web site whenever it changes. From my limited knowledge this could either be my web site space given to me by my provider or to a site that specifically provides this service. The 'own web site' method has...

have a small problem with a home network. Wonder if people can help. I have a desktop running XP Home networked wirelessly to a laptop running XP Pro. The desktop has a broadband connection which the laptop uses to access the internet. So far, so good. I have, however, been completely unsuccessful in my endeavours to share files. In windows explorer each machine can see the network under...

Hi people, I've got a strange problem where I can't connect to or ping a particular machine on the internet. However, I can connect to "sister" machine that is hosted at the same location. The machine I can't connect to is x.x.x.9 and the machine I can connect to is x.x.x.10. Once sshed onto x.x.x.10 and I can connect to x.x.x.9. A tracert to x.x.x.9 gets as far as the firebrick...

Hi guys, I've only dealt with ADSL lines. A friend is getting NTL Broadband installed in the next couple of days. What do NTL provide? is it just a cable modem that has a ethernet port to plug in to a NIC in Laptop/PC? If so, with regards of making it Wireless enabled, I just need to get a Wireless enabled router and a wireless card. Then the cable modem ethernet out goes in to the...

Hi, Friend has just got BT wireless kit from BT with a Plusnet connection. I set the laptop up in advance with WPA-PSK access using PKIP (?)- all works a treat. The desktop with the BT card (the wireless uses a Internal Toshiba system), we can see the WAP but can't connect to it - that is, it would connect, but suddenly dropped out and now can't get an IP address.) Any items to try before I...

Hi people, I've got a strange problem where I can't connect to or ping a particular machine on the internet. However, I can connect to "sister" machine that is hosted at the same location. The machine I can't connect to is x.x.x.9 and the machine I can connect to is x.x.x.10. Once sshed onto x.x.x.10 and I can connect to x.x.x.9. A tracert to x.x.x.9 gets as far as the firebrick infront of...

Got my network set up as follows: Cable modem-NIC1 on computer running SME server NIC2 on server-Wireless access point/switch-4 wireless clients and 2 wired ones I use the server box for routing/firewall/web cache/email server/windows file server/print server The problem I have is with the print server, its a USB samsung laser printer

Hi, I have 3 computers connected by coax. All worked OK. I connected my laptop via firewire, created a bridge and now the coax has stopped working. Help!

Anyone seen the following? I search http://www.eBay.co.uk, select an item, IE window goes blank and IE thinks it is downloading. ZoneAlarm and Netgear modem flash for a while (so downloading) but then stop. Nothing coming in but IE "world" still spinning (so it thinks it's downloading) and no item displayed! Refresh doesn't seem to help either! Thoughts? Paul DS.

Hi, Can anyone answer the following: If I run three wireless access points on a LAN and enable DHCP on just one of them, will this allow all the access points to assign IP addresses using DHCP? Thanks. Ken

This is for a home installation with network points in rooms. What sort is recommended? It'll be done under floor boards etc. as that is all currently already up. Cat6 and Sheilded cable? I won't be doing any of the installing myself (the electrician will), but just need to buy the bulk cabling and network sockets that screw on the wall.

Hi, I seem to be having problems with my WAG54G-UK accessing the internet.. I have static IP's and I am sure I have configured the router correctly but it just won't route.. My old cheapy connexant based router works fine.. Is there a trick to getting this to work? Whats the latest firmware for this and where can I get it?

about 300meters + Where do i get it from in the UK Stuart

I have just bought a Belkin ADSL wireless router. It's brand new out of the box and 'reset'. I can't log in to the 192.168.x.x page to configure it. Windows is stopping me. I have a Windows XP Pro/SP2 machine with all the latest updates and am using Norton Firewall etc. It was doing a fine job of accessing my previous wired router/adsl modem via a LAN cable and accessing a Belkin...

Currently have a dlink wireless router 624 rev c. Also, to connect to net, i have a dlink adsl modem dsl-300t. Ther seems to keep dropping the connection between the modem and itself and i keep loosing my internet connection. This is the 3rd modem it has done it on. I need a replacement, but i was thinking of a adsl modem/wireless router combi.

I am looking for a web filter, that i can use on my home network all machines xp pro sp2 I dont want the likes of Net Nanny, i would like a client/server, where software is installed onto a server machine and proxy settings are defined on cliients TIA Katie

Does any 1 know of a good dsl router that can handle more than one wan ip address ? been stuck on this problem for a while. i host my own email and web server behind my home 1 meg line. please help Thank you

A customer has proposed the network configuration http://fp.martinunderwood.f9.co.uk/network%20-%20original.gif Rob Morley has confirmed that it should work, but I want to check exactly how I should configure the equipment. Let's assume that the "wireless ethernet hub" is a bog-standard ADSL wireless router - Dlink DSL-G604T, for example.

just click on trusted zones on firewall tab. mike "BORG" wrote in message ... ZA is stopping my network for connecting with each other, and I can't see anywhere to set it up to trust the LAN anyone have a clue ? Using the basic free one .