Hi Folks I`m new to networking but have managed to setup a wireless system with my Laptop running XP home with a Buffalo 54g pcmcia card and my desktop running XP pro with a Buffalo 54g usb dongle. My question is how to get the maximum connecting speeds which seem to default to 11Mb even when sited next to each other?. The manuals arn`t much help and state even higher speeds should be...

I've just been trying to set up a wireless network: a router (belkin 7630, IP the default 192.168.2.1), and two XP clients, addresses set by dhcp: EA1 (192.168.2.2; actually a wired connection) and EA2 (192.168.2.3; wireless). The router would normally have an adsl uplink, but this isn't connected yet; EA1 has an existing dial-up internet link, which I'm not interested in sharing with the...

as a long term cable user I'm unsure of what I need to install ADSL for my 80 year old mum. I'm assuming a wires only option would be least expensive and I've yet to decide on the ISP but I'm looking a this basic, cheap n cheerful single port ADSL modem / NAT router firewall combo. http://www.solwise.co.uk/adsl-billion-5100s.htm I'll probably get a splitter from the same source, but what else...

As it says on the box! After some 13 hours I still cannot get it to talk to my router. Peter Crosland

Hello, I have successfully set my Belkin F5D7630-4A up to connect to the Internet (I am using it now!), completely wirelessly using the Belkin F5D6050 802.11b USB Wireless Adaptor. The problem I have is, whilst it all works fine using the default settings and the unencrypted default SSID of belkin54g, as soon as I change the security mode to 64-bit WEP and set the key, I can still...

what is it? A yahoo search brought up stuff about company, taxes and the internet Stuart

Bit of an old chestnut, I know. My wireless LAN (details below) has been moved to new location in a very old (and thick walled) house. All the stuff downstairs is fine, my squeezebox, laptop, PDA and desktop all talk to the router well through a couple of internal walls. Upstairs is a different story and I am having trouble with my gaming PC which is hidden away in an extension built on the...

Hello Group Here's my dilemma 3 desktop pc's. 2 downstairs, 1 upstairs Going to wireless network. Going to go with Netgear (unless someone recommends different) Should I go for the cheaper option wireless Router/modem DG 834GUK

is any one other than me having troulbe logging on to excite.co.uk some times i get another persons mail. getting told that my ip is blacklisted can/carnt send mail etc X-( ----------------------------------------- Message sent by Excite Newsgroups. http://www.excite.co.uk/newsgroup

Hi, I want to set up a wireless network to connect my PC in my ground floor study (which will have the ADSL router connected to it) with my 2 kids pcs in their bedrooms on the first floor. The line of sight between the study and the bedrooms is approx 10 meters and passes through a 11 inch cavity wall and 2 stud partition walls. I have looked at numerous reviews of numerous products but...

After doing a clearout, I noticed I had enough bits to make a router PC. PII 400Mhz, Gigabyte motherboard, 64Mb RAM PC66 2x 10/100 LAN (3com and CNET) 1Mb ISA card, or 2mb PCI Hard drives that I found spa CDROM drive 16x 250Mb, 1GB, 4.3Gb, 8GB

Bookmaker Victor Chandler ( www.victorchandler.com ) is donating £1 to the Tsunami Disasters Emergency Committee for every bet placed online or by phone before midnight on January 6th Minimum stake for an online bet is 5p

I have bought a Linksys wireless gateway (WAG54G) router/modem and have successfully set up wireless broadband sharing between my 2 computers - 1 desktop and 1 laptop. My desktop PC has a Linksys WMP54G wireless card installed and the laptop has in-built wireless functionality (g). The internet sharing is fault free. My problem is this - I have not yet set up encription/security measures...

Since installing the router ( D-link DSL-G604T ) my Norton Firewall has reported no attacks, apart from this one. Active perl overflow from IP 0.0.0.0 I think it's something to do with the router rather than an outside attacker, anyone else had it ? this ? -- Muzz reply to uglyduck NOT spamfrog

Hi I am looking to buy a canon ip3000 or similar printer with USB. I want to be able to share it on my home network. My house is fully networked so I dont really need wireless unless its my only option. Can anybody recommend a wired router preferably with ADSL modem.

Hey, I have got my Linksys Wireless Broadband Router (with SpeedBoost ^_^) to work in wired form, but it seems to be in self denial about its wireless capabilities. I have enabled SSID broadcasting, but it neither picks up the default ID when I reset it, or my old configured one with all the same settings from when it was working before.

Hi Group. I've had an easy time setting up TightVNC on a Netgear Router that I installed for a friend. A doddle from start to finish. Just like it said on the tin. However, now I have to do the same on an Origo Router, (An 8400 I think). Different gravy I'm afraid. It's got the same rather amateur looking admin interface as all of those

Someone has justed posted this in another newsgroup. It only has one port. Does anyone know if I plugged my existing 8 port switch into this would I be able then to connect more than 1 PC. In other words would this be my DHCP server??? ******************* 1 Port Ethernet ADSL Modem/Router with built in Firewall. It has some

When I log in to my router which is a Draytek Vigo 2600Gi (Wireless ADSL/ISDN router - I am using ISDN) - it asks for username and password in the usual fashion. I don't use a username but have a password set ( I presume it is more secure for having a password?). There is a tick box for remembering password. I tick this, but the next time I go in it hasn't remembered it. Is there a way of...

On Tue, 4 Jan 2005 12:57:33 +0000, wrote: X-Complaints-To: submitted as requested. This group isn't about the sort of networking used by MLM ****s, so don't bother trying to sum up enough intellect to try re-posting.