| | magic packet by
Chris
Hi,
What I'm looking to do is:
When one PC on the net work is booted it will send out a magic packet to
wake the rest.
Is this possible and is there any freeware to do the job,all I can find is
time controlled software but I need it from boot-up.
Thanks
Chris
http://teaup.port5.com
| | 4 | 40 |
| | PCMCIA Wireless Connection Problems by
Paul
I have an old Toshiba LapTop - a Satellite 220CS running Windows 98SE - and
I'm having problems installing a wireless adapter. I have tried a Belkin
and today a NetGear with the same results.
The software loads ok and the card is found by the software when inserted
and loads the drivers, but a few seconds later when the wireless connection
is made (when the lights light up on the card - one...
|
January 30th 04 11:25 AM
by Paul | 0 | 28 |
| | Private Network Address And DHCP by
Paul
I am using a windows peer-to-peer network with workstations assigned ip
addresses using DHCP. However, occasionally the workstations have a
'private network address' when i look under the network connections box.
When they have a private network address they are unable to access any other
workstations on the network. How can i stop this from happening and what is
it?
| | 1 | 24 |
| | Laptop accessing more than one network by
Andrew Sayers
Hi
I'd like to be able to use my laptop, running WinXP home, to access both my home
network and the one at the (small) school where I teach.
I can get it to access either (both with internet), but when I change from one to the
other I need to go into the TCP/IP properties and change the DNS server order to get
it to work. I suspect this really has very little to do with the server order,...
( 1 2 ) | | 13 | 50 |
| | Two Network Questions by
La di da Limey
Hi,
I need some advice re. my home network. I am having a loft conversion built
and want to have 2-3 points where computers can plug into the internet
simultaneously. I currently have a router (Netgear FM114P). Do I need to
run seperate connections to each point from the router or is there a way of
doing it in a loop, i.e. in series?
Secondly, due to the increased size of the house, certain...
| | 2 | 40 |
| | Anyone tried out a Belkin F5D7630? by
Paul Gardiner
I'm thinking of buying the Belkin all-in-one ADSL modem and WiFi unit,
but I can't find any reviews. The other possibility is the Netgear DG834G,
but I've heard of a few problems with that. The Belkin model has WPA
encryption too.
| | 2 | 23 |
| | XP Pro wireless problems (Newbie) by
George
Hi
I'm trying to access my laptop from a PC upstairs. The laptop is hooked up
to a linksys wireless access point and the PC has a wireless linksys card
installed.
The PC (upstairs) on XP Pro is finding the access point as I'm getting a
very strong reading but when I open Network places the only folders that are
showing are the PC (upstairs)XP Pro shared folders.
The PC (upstairs) is a dual boot...
|
January 29th 04 02:45 AM
by George | 5 | 23 |
| | Broadband router - some advice please. by
Calum Sinclair
Hi folks,
Was just looking for a small piece of advice.
Can anyone recommend a reliable and affordable Broadband router. It
is required simply for sharing my BB connection between two PC's?
A wireless option would also be considered if anyone knows of a
competitively priced one out there.
| | 4 | 12 |
| | Wireless signal strength by
David W Allen
I have a very simple set-up with a desktop acting as the ICS server plus
a laptop, both systems running WinXP. I have placed the WAP in a part of
the house where the signal strength on the laptop is either good or very
good wherever I wish to use it.
Without any alterations to either system, the signal strength has
dropped to 'low' and access to the desktop and the internet no...
| | 6 | 40 |
| | Constant traffic on WAN RX by
Paddy McGinty
I seem to have a constant albeit small amount of traffic on the WAN link of
my router to my home network. While I have been able to identify this, and
can monitor the amount of traffic coming in, I have not been able to fathom
out how to identify where that traffic is coming from. I'm using a netgear
RP114 and XP Pro if that makes any difference?
Hope someone can help?
|
January 28th 04 10:00 PM
by shope | 5 | 21 |
| | Wireless router (with built-in modem?) by
Peter Parker
Hi,
I have a desktop with a broadband internet connection, and as I have just
bought a laptop I'm looking for advice on what wireless router to buy.
Here's my setup:
* Desktop connects via USB Modem to internet (BTOpenWorld ADSL)
* Laptop is IBM ThinkPad T41 with Centrino & built-in 802.11b
* Laptop needs to connect approx 50-60 feet (17-20m) and a couple of thick
brick walls away from the...
|
January 28th 04 03:28 PM
by Conor | 4 | 14 |
| | NT and ICS by
Nick Upson
I have an XP machine sucessfully acting as internet gateway, via ICS, to an
W98 machine on my lan. Now I have added an NT box to the lan and want that to
access the internet via the XP box as well. It's all working EXCEPT (you knew
there was one) when I go to microsoft.com in particular I want to use windows
update and it just won't have it. I can sometimes get...
| | 0 | 28 |
| | Buffalo WBR-54G and DLink DSL-300G+ by
Daniel Clarke
Has anybody tried using a Buffalo WBR-54G (Broadband Router) and DLink
DSL-300G+ (xDSL-Ethernet Modem)? I was interested in the Dlink because it
supports SNMP
Otherwise I'll buy the XModem which doesn't support SNMP.
Thanks,
Daniel
| | 0 | 17 |
| | Limited network access and no internet by
AMC
I have 3 pc's networked. All running ME. Two are hardwired to a Linksys
Wireless G router, the third uses a Linksys wireless card. When set up all
worked well, but since upgrading the wireless PC there are some probs.
The two hard wired PC's can access each other and internet - no issues.
The Wireless PC displays the shared folders in Network Places and can access
those folders. However,...
|
January 27th 04 10:01 AM
by AMC | 4 | 32 |
| | Firewall Protection by
James W Sheffer
Hi All,
I am connecting to internet (DSL) using a hub (sometimes only a crossover
cable) on a home network. Zone Alarm Pro asks me for permission when an
executable tries to connect from the main computer, but NOT when a program
tries to connect from the clients.
For total protection do I need Zone Alarm installed on all three PC's or can
I configure ZAP on the server PC to protect all of the...
| | 1 | 28 |
| | Newbie by
George
Hi
I'ved got a Linksys Wireless-G Access Point along with a Linksys wireless-g
PCI card, a PC upstairs and a laptop with a Lan card.
Can I hard wire the laptop(via the Lan card) into the Wireless Access Point
and access the PC upstairs which will have the Wireless-G PCI card installed
and vice versa.
I'm awaiting broadband to be available shortly. Can I just purchase a
wireless PCMCIA card for...
|
January 26th 04 06:44 PM
by George | 2 | 41 |
| | FileSharing on the Internet by
Domain105
Hello all,
Somethings been bugging me for a while now so I thought I'd ask the
question.
Scenario...
I've got a Origo DSL router with only one PC on the network. Router
is set to DMZ to my pc (192.168.0.1) so all ports should be forwarded
to my PC. Pc has firewall running
| | 2 | 39 |
| | Belkin 7630 and hotmail problem by
Trevor@jyates.freeserve.co.uk
Good news for all who have the Belkin 802.11g wireless modem/router
and who had trouble (like me) using hotmail. Belkin have now posted a
firmware upgrade to their website - and it works!!!
Trevor
| | 0 | 40 |
| | La chance de votre vie by
Andrew Sayers
"Marc" wrote:
Faite de l'argent facilement avec un commerce internet à paliers multiples.
L'achat de ce commerce comprend sa propre promotion auprès de 3600 personnes par mois et ne demande aucune connaissance commerciale.
Tout ce que vous avez à faire est de vous inscrire.
P.S.: Parlez en à vos ami(e)s si vous voulez qu'ils vous accompagnent dans votre futur train de...
| | 0 | 19 |
| | Win XP to MAC by
Fids
Hello All,
Got a Home Network connected via a Hub which is working like a dream.
Configuaration is:-
Bradband to PC1 - To Hub - To PC's 2 & 3 - All running XP
Have just added a laptop running Win98 successfully
Now I have managed to get me hands on a iMac G3 running Mac 9.2 - Question
|
January 25th 04 07:59 PM
by Ric | 2 | 25 |