In message , in2minds writes using a Win2K PC as a server and WinXP as the client, for ICS purposes is there a program I can use to start/control programs on the server (to run on the server) from the client machine ? Take a look at VNC. It will allow you to take complete control of either machine from the other.

Hi there to everyone, I hope that you can help, I brought a generic pc wifi card for my laptop (an old p2 266mhz compaq, 92 meg mem, 4gb hd) and a generic usb wifi lan. The instuctions such as they are are less than helpful. Can anyone give me some pointers as to how to set them up properly. Both my main pc and the laptop have win xp home ed, the main server has certain folders enabled to share,...

Hi, I use a BT Voyager 2000 router for my home network. Recently I tried to uninstall the USB adapter software from an XP box and re-install it ( no such luck). Now I can't fully install/delete the software and drivers. Any ideas anyone

You may well find that your local library can offer you what you need or failing that, take a look at UK Online (the government site not the ISP)

I would like to create a wireless network at home.. I have a desktop PC, and a laptop which gets used in various places around the house. What I need to know is the following: 1) Can I just buy a PCI wireless card for the desktop and a PCMCIA wireless card for the laptop and get them to talk to each other? I realise that there's different standards, and presumably I'd have to make sure they...

have you setup dns servers? Mak wrote: I have the following simple setup :- ADSL - USB - Server(pc) - LAN(Cat5) - WRT54G - WIFI - WPC54G - Client(Laptop)

Welcome :) Do you have Micronet SP3351 manual (english PDF, without asking about chinese letters installation). THX -- Niko ;) email: niko (at) w.pl GG: 28101 ICQ: 22909800

In article , says... I used to go to evening and part-time day classes at the University Of Wales, Aberystwyth, and found that this gave me access to the university's computer facilities. This was great, as I can't afford a computer of my own. I'm looking for somewhere else to live now, and I'd like to go to a...

We know it sounds TOO good to BE true, but it’s REAL! Our International Technology firm will pay you hard cash each time FREE software is downloaded. Best of all you will only have to download ONE piece of software ONE time for FREE and you can be on your way to earning BIG! FIND OUT MORE BY VISITING http://JeromeMcCrea.PlugUsIn4Cash.com

there was something about it either in PC Pro or tomshardware (i think i may have seen it on both) a while back, i would recommend giving them them static ips not DHCP. Spinal wrote: My 2 PCs connect to the internet via My 4 Port ADSL Router. And since my new mobo in the PC has a FireWire port, ive bought a firewire cable to connect the 2 PCS for the faster transfers between them.

Hi All, first posting here so fingers crossed.... I have a network camera and want to bypass the built in logon screen so it embeds in a normal web page using java, below is the script which Intellinet supply and it all works over the LAN but how do I get it to work from a web page on the internet as logging in from else where I get the screen but no image which is because of the ip...

I'm after a combo Bluetooth/Wi-Fi PCMCIA card and have found the following one by Smart: http://www.smartmodulartech.com/product/c_combcardbus_mob.cfm Does any one have any comments on this or any other models that might be available? 802.11a/g support would be good, but not strictly necessary. Any comments appreciated.

Up until a few months ago I was using a crappy generic adsl modem/router to connect my 2 PCs and 2 laptops to the internet and each other. When this died I thought I would push the boat out and splurge £100 on a Netgear DG814 router. Since installing this the pcs all connect to the internet but I cannot get them to network with one another. the network kinda looks like this:

Hi I have 3 pcs connected through a hub all with Win98se all work fine share files,printers and internet no problem. The problem is When I connect my laptop up (which has xp pro installed) it connects to the internet fine, sees other computers fine, but when I try to access my laptop from any of the other pcs it asks for a password, but I haven't any passwords set up on the laptop.

Could anyone point me to a good, clear, easy to follow guide to setting up a wireless home network, please? I want to network a desktop PC to a laptop. Both are running Windows XP Home. Currently the desktop PC is connected to BT Openworld BB via the Alcatel Speedtouch 330 ADSL modem. My main concern is do I need to purchase a different BB modem or just a wireless router (as well as a PCI card...

My brother got an XBOX and I noticed it has a network (RJ-45?) port. I'm assuming I can connect this to the network, but why would we? What bonuses does it/the network have when it's connected up? Marcus

We have a small LAN at work with broadband and a D_Link DSL-504 router. I have broadband (with Netgear 824M router) at my home and I want to access the LAN using PC Anywhere (or similar). D-Link tech support seem vague and somewhat inconsistant with their advice on the DSL router setup. Any advice would be very much appreciated.

Is the following possibel: TW dsl into NIC 1 on my Desktop PC From NIC 2 in Desktop PC, a long Cat5 down to my lounge where it connects to a router. From the router there is an Xbox and a Wireless Access Point (WAP) Is this workable??

What is the best Wireless Access Point and PCMCIA cards available in UK? I already have a decent hub and adsl modem, and my major concern is about getting the best coverage throughout the house and Im assuming that an access point plugged into the hub will be best solution. The reason why I ask is that I used to have the Asus ADSL modem with integrated hub and wireless but the range was...

Setup: Broadband--XP--W98Se--Printer Why are the computers assigning the 169.xxx.xxx.xxx heirarchy of IP addresses to my network adapters? Filesharing works but ICS does not. Marcus