| | Wireless Network Question by
Christo
Hello,
I currently have a home wireless network setup and I have a question about
adding to this setup, Currently there is a router situated downstairs in my
house, I use this router to access the internet on my PC and on the Laptop.
I want to have a PS2 in my bedroom which I can use to play online games
with.
Is there any type of access point that I can use to the pick up the wireless...
|
September 20th 06 04:12 PM
by Christo | 2 | 15 |
| | WiMAX by
Tim Cogher
Hi all,
I have just finished writing up the End of Course Assignment for my course
with the O.U. (T209 if anyone's interested). The major subject of the
assignment was WiMAX. Has anyone any practical experience with this
technology? Reception speed, Reception quality?
I'm not after anything I can use for my course, that's finished and sent,
i'm just curious.
| | 3 | 28 |
| | NAS for W95 WXP network. by
norm
Is there a Network Attached storage device that will work for W95. It
is ethernet connected to a wireless router, and an WXP computer
connected to the router by wireless?
The XP HD is formatted FAT32 so sharing files with W95 works.
Dont want to use FTP that some NAS devices offer.
Thanks
Norm
| | 1 | 25 |
| | wifi by
moffs
with the advent of wifi it is uncouragable that tvl in uk want to put a
price on having a wifi router in your own home. this is an envrigment
of our human rights to have a network in out home without wires. this
to me is just another way for the BBC tring to gain money out of our
fast depleting pockets.
hope everbody feels the same as me
( 1 2 ) |
September 16th 06 02:08 PM
by Trev | 12 | 76 |
| | Draytek Vigor 2600VG - fix IP address? by
Jon
Hi,
I want my unit to assign IP addresses using DHCP, but I want to be able
to fix the IP address assigned to each device.
Can it be done?
--
Regards
Jon
|
September 16th 06 09:56 AM
by Jon | 3 | 30 |
| | Piggy-backing a PC onto a network by
Nel
I have a 2 PC wireless network set up at home.
I'm forever fixing other people's computers and was sick of unplugging all
my cables from the upstairs one to connect to the other machine when
installing etc. So I bought a KVM switch to give me a spare set of cables
and this system works a treat.
However, I thought while I was doing this, I may as well use my PC's
internet connection to...
( 1 2 ) | | 11 | 27 |
| | need participants for an international study by
Monica
Hi all,
I'm conducting an international study on individuals' attitudes towards
how computers should be used at work and views on how responsible
employers should be when it comes to protecting our computers from
spyware and viruses. I still need about 500 indviduals.
I would really appreciate it if people could complete the survey, found
he
http://weblab.org.uk/cgi-bin/surfcontrol/page1e.pl
|
September 15th 06 12:03 AM
by Monica | 0 | 16 |
| | Home network - can connect via IP but not machine name by
M
Hi,
Running a simple wired / wireless network at home, and was all running fine
until had a power cut and machines had to be re-booted.
Had set up file / printer sharing from main pc. From other pc I can only
access the main pc via IP address and file sharing. I cannot access the
main pc via its name or connect to the shared printer - and all this worked
fine before the power cut.
Any...
|
September 14th 06 07:13 PM
by Tx2 | 4 | 22 |
| | Trying to configure Netgear WN511B by
Craig Cockburn
Hi
Does anyone know how to configure the above? I've configured the
modem/router and all seems to be fine there. I've installed the software
at the remote end for the laptop card, then inserted the laptop card and
completed installation but can't go any further. When I click on the
configure icon on the desktop nothing appears and I can't enter any
settings. Basically the smart wizard won't...
| | 0 | 19 |
| | More Issues with Demon Broadband by
CJB
Jeeze - this stuff is complicated - and I've been in i.t. for years.
I now have the BT line up and running on ADSL. Demon have sent me a
Speedtouch 330 modem which works OK. It is a USB modem which is a pain
'cos I only have two USB ports on the laptop and I need those for
peripherals. However I can now connect to the Internet - albeit a bit
slow.
The laptop also has an Internet port (I think)...
( 1 2 3 ) | | 27 | 48 |
| | Query re notebook adaptors by
Craig Cockburn
Hi
I've just bought one of these
http://www.amazon.co.uk/Netgear-DG834N-RangeMax-Wireless-Router/dp/B000G3
JTV2/
and Amazon were doing a deal that the router can come with a free
adapter for a laptop. I might get a laptop sometime down the road, but
currently I have an extra PC I'd like to connect up. Is there such a
( 1 2 ) |
September 13th 06 10:42 PM
by kraftee | 10 | 29 |
| | Newbie Questions by
jas1959@hotmail.co.uk
Hi,
This has probably be asked a zillion times before (if there is an FAQ
for this group, please could some point me at it?) but here goes ...
I have an existing single computer 512K ADSL connection from Orange
(formerly Wanadoo and Freeserve) using a Speedtouch modem. Is it
possible to convert this to a multi-PC wireless network without
replacing/upgrading my existing connection (other than...
| | 3 | 21 |
| | Demon's Lack of Customer Support - Again by
CJB
As part of my new Demon Domestic 800 broadband package to be connected
via a BT landline I now have a Speedtouch 330 modem. However the
config. instructions state that I have to use either PPPoE or PPPoA USB
drivers, or RFC1483 USB drivers and that this should be confirmed by
the respective ISP.
Secondly I need the technical 'service name' that I have to use with my
userid and password. (I have...
| | 7 | 15 |
| | computing and network support by
moffs
hello i know this is kind of off topic but i would like people to know
that i am currently taking a course at college in computing and network
support. i hope if you have any problems you will contact myself and if
i have any probs i may be able to contact you all. The course i am
doing covers everything from internet theory through to repairing pcs
and networks.
so if u have any problems give me...
|
September 11th 06 11:15 PM
by Conor | 1 | 12 |
| | Running Cables - Future Proofing by
Jukka Aho
Jane T wrote:
On the other hand, if you're too cheap for that, you can make do
with less fancy solutions. This is mine:
http://www.saunalahti.fi/znark/kotiverkko/
The location is a clothes closet. I've replaced the 10 Mbps hub with
a 100 Mbps switch after taking that picture. There's also a headless
PC server in that closet, on a separate shelf, but it's not visible
|
September 11th 06 10:03 PM
by Jane T | 3 | 12 |
| | Is it possibile to connect 2 wireless routers wirelessly? by
[L.]
I'm trying to rig up a temporary arrangement to connect an older PC to
the LAN.
Unfortunately, because of its location, I cannot just run a length of
CAT5 cable to the router.
I have, however, an extra wireless router.
I was wondering if -- just as it is possible to daisy chain a second
router through Ethernet (with all the caveats that this entails, of
|
September 11th 06 10:00 PM
by devs | 8 | 24 |
| | WTD faceplate for combined ethernet and phone by
Aosmosis
I have a single CAT5 cable running 30m to another room.
Primarly this will be used for the phone, but I may want to use it for
a LAN at a later stage. Running another cable or wireless isnt an
option, and as long as I do get 10Mbps that will be fine.
Does anyone know where I can get a faceplate that has both phone and
LAN connected to it?
I am assuming that I can use the brown/ brown+white pair...
( 1 2 3 ) | | 21 | 42 |
| | Use a cable router on ADSL? by
Toby Newman
I am sorry if this is a naive question. I have only ever used cable
broadband (from NTL) and never used ADSL, so my knowledge of it is thin.
I currently own a Belkin Wireless G Router (Part # F5D7230-4) as seen
he
http://tinyurl.com/6jx32
This connects to my NTL cable modem via a standard networking patch
cable (CAT5/RJ45).
| | 3 | 18 |
| | where am i going wrong ? by
luna_s
im going mad im sure of it
ive a netgear gs105 gigabit switch
and a netgear FR114P router,
ive a NAS box which is connected at 1000Mbps (i can tell by the light on the
switch)
but my PC wont connect at 1000Mbps at all, its definately a gigabit nic.
Im running xp64 with a asus M2NPC-VM mobo.
when i force it to 1000 autoneg the cable disconnects itself and will only
|
September 9th 06 09:48 AM
by luna_s | 5 | 22 |
| | The Fishing Industry - The Greatest Animal Welfare Scandal of Our Time? Introduction by
Steve
The Fishing Industry
The Greatest Animal Welfare Scandal of Our Time?
An Animal Aid report looking at the impact of eating fish on animal
welfare, human health and the environment
Introduction
The warnings related to the ocean and farmed fishing industries are
coming faster and harder. Species that were once plentiful are being
| | 2 | 20 |