This is a monthly posting giving information about the Usenet group uk.telecom.voip. If you are a new user, or even if you've been around for some time, please take a few minutes to read through the charter and bear it in mind when posting. Charter for uk.telecom.voip ===================

Please can anybody help! I've asked already but havn't got a clear answer. I tried the setting that sipgate recommends for Grandstream Handytone-486. Everything( inbound CID to incoming VOIP number, all outgoing CID) works fine but incoming CID to PSTN number don't show up! I tried different cables, BT-to-RJ11 adapters,microfilters between ATA and phone, etc. etc. DECT: BT Diverse 4010 ATA: VOIP...

On the VoIP phone, I tried setting ACR (*227#) and got NU. However, the service is now set ON and I can't turn if off (#227#). Regards

Hi, I am looking to get a voip adaptor to connect a normal DECT phone to my cable modem. I am looking at the Grandstream range possable the 486. I mainly use voipstunt. Any problems with this ?? what is the difference with the lower spec models 286 amd 386 and the 486?? is it worth spending the extra money?? Any thoughts on the Linksys SPA-1001 ??

I have the BT talk number programmed into my SPA2102 but it seems to keep unregistering itself It does come back as registered sometimes, not sure how it does it. But most of the time if I access the 2102 it shows that line as being not registered any thoughts? Thanks

On Feb 13, 2:07 pm, Invalid wrote: In message , writesIntermediary to 2 independent phone line. Caller calls a number of line A, the connected device allows the caller to dial a number of line B. www.vikingelectronics.com, their RAD-1device looks to do exactly what you want...

Hi, I have been looking into a Voip adaptor for a friend who wises to use he's sipgage number via a normal phone. I found this one on the PC world site: http://tinyurl.com/ynoqx6 which mentions Vonage. My question is does anyone know if this would work with the Sipgate system and if not can anyone suggest an alternative. TIA

Hi there bought the above a few days ago sealed from staples. finally managed to get into it with 192.168.61.1 only to find someone elses account info on the voip page when i try to register it with sipgate it tells me where to go. this was bought sealed from staples in the UK.

I use voip.co.uk for my home phone (have a mobile for backup). I have two sky boxes - both plugged into the voip line. The sky boxes are trying to communicate with the SKY server but cannot. I have raised this with voip.co.uk and had the following advice in return .... Please bear in mind that I use a Sipura 1001 ATA -and I'm not techie.

Does anyone experience "busy" tones first thing in the morning (08:00 onwards) ? I was trying to phone the local doctors surgery this morning.... wait... it's a relevant factor.... If you haven't tried phoning of late, all the doctors numbers have been changed to 08444 numbers. There was no-way I could get through using voipcheap.com but my voipfone account went through without hesitation.

At work we are going to change our old Samsung analogue system to a new BT digital system with broadband module. There will be a button for an VOIP connection but if we use BT VOIP this will cost apparently £18.99 per month! So, how does one route a system like this to connect with a free VOIP provider? On a computer obviously one just downloads the software and off you go, but in a phone...

Hello, I would like to set up the following VoIP architecture with a full SIP-to-XMPP gateway (chat, presence, audio and video) : 1. XMPP server ; 2. SIP server with my own domain ; 3. SIP mapping with a SIP-to-PSTN number. The purpose is to have a transparent gateway so that when I'm connected

I have a Binatone Fusion 2200 DECT Phone plugged into a Linksys PAP2T ATA and place outgoing calls via VoipDiscount. The people I call say that when I speak my voice is a little on the quiet side. Is there anything I can do to increase the volume? The PAP2T has no user manual with it and I don't want to mess in case I mess things up!!! The setting in Audio Config are as follows

Hello, searching the web hasn't yet brought up much of the kind of information I am looking for: a comparison of several IAX-capable phones on the market in terms of price, capabilities, user-friendliness, etc. Would anybody be aware of a site with such information or possibly know of a magazine that has published an article to that effect. TIA!

Video: Some interesting views on residential VOIP communication from Yahoo's Director of Engineering. http://www.zdnet.co.uk/toolkits/voip/0,1000001500,,00.htm Remove 'no_spam_' from email address.

I have a standard wired phone connected to the ATA which is working great with Sipgate. The only thing is - if my phone is off the hook but not actually on a call, callers from BT lines do not hear any tones at all and number unobtainable message is generated from Virgin mobile. Is it possible to change any settings so that callers receive an engaged tone? If I'm actually on a call then...

Hi, I have setup a TrixBox (Asterisk) and was wondering how many simultaneous outgoing calls are possible per SIP trunk? Would it be 1 outgoing call per SIP trunk, meaning that 4 simultaneous calls would require 4 trunks (and maybe 4 separate VoIP accounts)? Or are there VoIP account packages that allow you to place more than 1 call at a time on a single account?

Has any body made it working? What are the settings? DECT: BT Diverse 4010 ATA: VOIP GATEWAY 102 (clone or similar to Grandstream Handytone-486/488) ATA Settings-FXS Impedance: tried CTR21(270R+750||150nF),600R and UK/Newzealand#2(370R+620R||310nF) ATA Settings-Onhook Voltage: tried 36V and 48V Thanks,

Hi, The folks on uk.telecom thought this would be the best group to post this to.... I have just moved to Orange and have paid the extra £5 to upgrade to 8mb and their VOIP phone service. The trouble is that they can't give me a phone number with my STD code so I have an 0845 number. Since most telecom companies charge a fortune for calling 0845 numbers, I

I noticed this ATA with WAN,LAN,PSTN pass-through ports on the ebay. Have anybody got one? Any comments?

Ok (see VOIP Calls To me part 1 and 2) I have now got my system set up so I can dial out with VopDiscount and have got a local number that people can ring me on (Thank you {{{{{Welcome}}}}} ) I have an unlocked Linksys PAP2T with the latest firmware. How do I get something to display on caller IDs when I ring via VoipDiscount. If I do ring "UNAVAILABLE" is displayed.